75 OHM VIDEO LINE DRIVER
TK15412
75 Ω VIDEO LINE DRIVER FEATURES
s Fixed Gain (6 dB) s Internal 75 Ω Driver with Clamp Circuit s Very Small Outpu...
Description
TK15412
75 Ω VIDEO LINE DRIVER FEATURES
s Fixed Gain (6 dB) s Internal 75 Ω Driver with Clamp Circuit s Very Small Output Capacitor Using SAG Function Pin s Active High ON/OFF Control s Very Low Standby Current (typ. ISTBY ≤ 25 µA) s 2 Input/1 Output Video Switch s Single +5 V Power Supply Operation
APPLICATIONS
s s s s s s Video Equipment Digital Cameras CCD Cameras TV Monitors Video Tape Recorders LCD Projectors
DESCRIPTION
Operating from a single +5 V supply, the TK15412 is a single-channel video line driver IC that takes two standard video analog inputs and provides one buffered analog output for driving a 150 Ω load. The TK15412 features a built-in 2 input/1 output video switch on the input. The selected video input signal (1VP-P typical) is internally clamped at 1.25 V and amplified 6 dB to produce 2 VP-P (typical) into a series 75 Ω resistor and 75 Ω cable load. During standby (Pin 5 grounded), the TK15412 consumes only 125 µW of power. Nominal power dissipation (no input) is typically 73 mW. The TK15412M is available in the SOT23L-8 surface mount package.
TK15412
INPUT_A
OUTPUT
01S
VCC INPUT_B
SAG GND
CHANGE-OVER SW
STANDBY
BLOCK DIAGRAM
VCC
75 Ω Driver
1.5 kΩ
ORDERING INFORMATION
5 kΩ 5 kΩ
GND
TK15412M
Tape/Reel Code
TAPE/REEL CODE
TL: Tape Left
January 2000 TOKO, Inc.
Page 1
TK15412
ABSOLUTE MAXIMUM RATINGS
Supply Voltage ........................................................... 6 V Operating Voltage Range .............................. 4.5 to 5...
Similar Datasheet