|
|
Control Modules. P7Z7ABB700W Datasheet |
|
|
|
Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272
POW-R-BRIK™
Phase Control Modules
345-800 Amperes/400-3000 Volts
OUTLINE DRAWING
MARKING: DEVICE
AND DIRECTION
ACCORDING TO CIRCUIT
CONFIGURATION CHART
G TAPPED HOLE
x 0.50 DEEP
TYP. 3 PLACES
C
CL
K1 X2
CL
L TYP. 4 PLACES
MARKING: K1
AI/K2 (ANODE)/(CATHODE),
AND A2 (ANODE) AS SHOWN
A2
DB
FF
A
MARKING: STYLE NO. WITH DATE
CODE & MFG. LOCATION CODE
(CUSTOMER PART NO. OPTIONAL)
E Ø THRU HOLE TYP. 4 PLACES
(FOR TYP. 1/4-20 SOCKET HD. SCR.)
(& BELLEVILLE SPRING WASHER)
GATE (WHITE) & CATHODE
(RED) LEADS 12.5" LONG
WITH 0.375" LONG
STRIPPED ENDS
SENSOR (WHITE) LEADS
12.5 ±0.5" LONG WITH
0.375" IN LONG STRIPED ENDS
CASE ANODIZED PER
MIL-A-8625, TYPE II
CL
Outline Drawing
K
J
H
THIS SURFACE
MUST BE PROTECTED
AND NOT DAMAGED
Z7A Outline
Dimension
A
B
C
D
E
F
G
H
J
K
L
Inches
Millimeters
6.30 153.16
3.02 76.70
3.15 80.01
2.47 62.73
0.328 Dia. Dia. 8.33
1.83 46.48
5/16-18
5/16-18
UNC-2B
UNC-2B
1.27 32.25
2.09 53.08
2.25 57.15
0.56 14.22
Mounting Bolt (E) Torque Limit is 11 ft.-lb.
Electrical terminal (G) torque limit is 11 ft.-lb. for type
Z7A and 20 ft.-lb. for Z9A.
Apply a thin coating of thermal joint compound to heat
sink surface prior to module mounting.
Module weights: Z7A weighs 6 lbs. while the Z9A module
weighs 11 lbs.
If incoming tests are done for isolation voltage, the volt-
age should be applied in a slow manner rather than
abruptly imposed on the device. The voltage should be
applied between the top terminals, which must be shorted
together, and the metal case.
The metal case is anodized and provides added voltage
isolation capability if not damaged: factory hi-pot test is
achieved without the benefit of the anodized coating.
POW-R-BRIK™
Phase Control Modules
345-800 Amperes/400-3000 Volts
Z9A Outline
Dimension
Inches
Millimeters
A 7.50 190.50
B 3.70 93.98
C 3.15 80.01
D 3.15 80.01
E 0.328 Dia. Dia. 8.33
F 2.03 51.56
G
3/8-16
3/8-16
UNC-2B
UNC-2B
H 1.51 38.35
J 2.52 64.00
K 2.75 69.85
L 0.56 14.22
Ordering Information:
Select the complete thirteen digit
module part number you desire
from the Configuration Reference
Description.
Example: P3Z7ACT700W16 is a
1600 Volt, 375 Ampere Average,
Dual SCR POW-R-BRIK™ Module
with the standard thermistor.
Description:
Powerex POW-R-BRIK™ Modules
are designed for medium and high
current power control applications.
POW-R-BRIK™ Modules feature
an electrically isolated package
that simplifies system packaging,
installation and cooling.
POW-R-BRIK™ Modules utilize
Compression Bonded
Encapsulation (CBE) mounting
and double side cooling of the
semiconductor elements. The Z7A
outline POW-R-BRIK™ uses
33mm or 38mm elements and the
Z9A outline POW-R-BRIK™ uses
50mm elements. Standard circuit
configurations include Dual SCR,
Dual Diode, SCR/Diode, and
Diode/SCR. Additional circuit con-
figurations, e.g. Single Element,
Common Cathode, Common
Anode, and special element types,
e.g. Fast Switch SCRs, Fast
Recovery Diodes, GTOs, and
Transistors are available.
Features:
Ⅺ Electrically Isolated Packaging
Ⅺ Anodized Aluminum Housing
Ⅺ Internal Copper Contacting
Ⅺ Gold Element Contacting
Ⅺ Internal Temperature Sensor
Ⅺ Compression Element
Contacting
Applications:
Ⅺ AC Motor Starters
Ⅺ DC Motor Controls
Ⅺ Resistance Welding Controls
Ⅺ Mining Power Centers
Ⅺ High Voltage Motor Starters
Ⅺ Transportation Systems
P-1
|
Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272
POW-R-BRIK™
Phase Control Modules
345-800 Amperes/400-3000 Volts
Configuration Reference:
The POW-R-BRIK™ part number
system takes the form P3 Z7A
CT7 00 W16 where:
• P3 is the configuration number.
The configurations are shown
pictorially in the right hand
column.
• Z7A is the package type per
the outline drawings Z7A and
Z9A on this data sheet.
• CT7 denotes the element code.
The Element Code Reference
at the end of this data sheet
provides information on the
standard element codes
including the corresponding
disc device using the element.
Refer to the appropriate disc
package data sheets in the
Powerex Semiconductor Data
Book for additional device
specifications.
• 00 denotes special features:
00 – module includes
standard thermistor
XT – no thermistor
AA-ZZ – denotes unique
customer specification
• W16 denotes voltage code per
the table below. Note that not
all voltage ratings are available
for every element. Refer to the
Element Code Reference for
available voltage ranges for a
given element.
Elements
Voltage Rating
400
600
800
1000
1200
1400
1600
1800
2000
2200
2400
2600
2800
3000
Voltage
Code
V04
V06
V08
W10
W12
W14
W16
W18
W20
W22
W24
W26
W28
W30
Circuit Configurations:
P1 - DIODE
P4 - FAST DIODE*
S
Element 1
Element 2
P2 - SCR/DIODE
P5 - FAST SCR/FAST DIODE*
S
Element 1
P3 - SCR/SCR
P6 - FAST SCR/FAST SCR*
Element 2
S
Element 1
P7 - DIODE/SCR
P8 - FAST DIODE/FAST SCR*
Element 2
S
Element 1
Element 2
* Consult Factory for Available Ratings.
P-2
|
Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272
POW-R-BRIK™
Phase Control Modules
345-800 Amperes/400-3000 Volts
Typical Thermistor Circuit
Thermistor temperatures can be
measured using the following
circuit arrangement in conjunction
with a 5 volt source. Resistance
values for R1 and R2 are specified
for two operating temperature
ranges.
5 VOLT SUPPLY
R1
THERMISTOR
GATES
POW-R-BRIK
R2 VO
CONTROL:
PROTECTION
CIRCUIT
1. Temperature range, 75°C
through 125°C
R1 = 3.5K ohms
R2 = 840 ohms
V0 = 2.5 volts at 100°C
2. Temperature range, 90°C
through 140°C
R1 = 2.2K ohms
R2 = 500 ohms
V0 = 2.45 volts at 115°C
POW-R-BRIK™ Thermistor
Characteristics
Element
Average
Thermistor Thermistor Temperature
Resistance Temp. Steady State Dynamic
Ohms
°C °C (Min.) °C (Max.)
12093
40
43
50
7337
50
53
60
4990
60
63
70
3324
70
73
80
2262
80
83
90
1569
90
93 100
1316
95
98 105
1109
100
103
110
938 105 108 115
797 110 113 120
680 115 118 125
582 120 123 130
500 125 128 135
431 130 133 140
Curve matched ±2% over temperature range of +40°C
to +125°C. Resistance tolerance specified at +125°C,
±6%.
Without self heating, 10mW maximum thermistor
dissipation.
Use “Sensor at Tj” ohms from characteristics for
recommended steady state overload trip resistance.
The output signal (V0) is
approximately 30 mv/°C over the
temperature range indicated.
TRANSIENT THERMAL IMPEDANCE
CHARACTERISTICS (JUNCTION-TO-CASE)
Z7A
10-1
10-2
10-3
10-4
10-3
10-2
PER ELEMENT,
BOTH CONDUCTING
PER ELEMENT,
ONE CONDUCTING
PER MODULE,
BOTH CONDUCTING
10-1 100 101 102 103
TIME, t, (SECONDS)
TRANSIENT THERMAL IMPEDANCE
CHARACTERISTICS (JUNCTION-TO-CASE)
Z9A
10-1
10-2
10-3
10-4
10-3
10-2
PER ELEMENT,
BOTH CONDUCTING
PER ELEMENT,
ONE CONDUCTING
PER MODULE,
BOTH CONDUCTING
10-1 100 101 102 103
TIME, t, (SECONDS)
P-3
|
| @ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact) |