POWER TRANSISTORS. TIP32 Datasheet


TIP32 TRANSISTORS. Datasheet pdf. Equivalent


TIP32


PNP SILICON POWER TRANSISTORS
TIP32, TIP32A,TIP32B, TIP32C PNP SILICON POWER TRANSISTORS
Copyright © 1997, Power Innovations Limited, UK JULY 1968 - REVISED MARCH 1997

q

Designed for Complementary Use with the TIP31 Series 40 W at 25°C Case Temperature 3 A Continuous Collector Current 5 A Peak Collector Current Customer-Specified Selections Available
B C E

q q q q

TO-220 PACKAGE (TOP VIEW)

1 2 3

Pin 2 is in electrical contact with the mounting base.
MDTRACA

absolute maximum ratings at 25°C case temperature (unless otherwise noted)
RATING TIP32 Collector-base voltage (IE = 0) TIP32A TIP32B TIP32C TIP32 Collector-emitter voltage (IB = 0) TIP32A TIP32B TIP32C Emitter-base voltage Continuous collector current Peak collector current (see Note 1) Continuous base current Continuous device dissipation at (or below) 25°C case temperature (see Note 2) Continuous device dissipation at (or below) 25°C free air temperature (see Note 3) Unclamped inductive load energy (see Note 4) Operating junction temperature range Storage temperature range Lead temperature 3.2 mm from case for 10 seconds NOTES: 1. 2. 3. 4. V EBO IC ICM IB Ptot Ptot ½LIC 2 Tj Tstg TL VCEO VCBO SYMBOL VALUE -80 -100 -120 -140 -40 -60 -80 -100 -5 -3 -5 -1 40 2 32 -65 to +150 -65 to +150 250 V A A A W W mJ °C °C °C V V UNIT

This value applies for tp ≤ 0.3 ms, duty cycle ≤ 10%. Derate linearly to 150°C case temperature at the rate of 0.32 W/°C. Der...



TIP32
Copyright © 1997, Power Innovations Limited, UK
TIP32, TIP32A,TIP32B, TIP32C
PNP SILICON POWER TRANSISTORS
JULY 1968 - REVISED MARCH 1997
q Designed for Complementary Use with the
TIP31 Series
q 40 W at 25°C Case Temperature
q 3 A Continuous Collector Current
q 5 A Peak Collector Current
q Customer-Specified Selections Available
B
C
E
TO-220 PACKAGE
(TOP VIEW)
1
2
3
Pin 2 is in electrical contact with the mounting base.
MDTRACA
absolute maximum ratings at 25°C case temperature (unless otherwise noted)
RATING
SYMBOL
VALUE
UNIT
Collector-base voltage (IE = 0)
Collector-emitter voltage (IB = 0)
Emitter-base voltage
Continuous collector current
Peak collector current (see Note 1)
Continuous base current
Continuous device dissipation at (or below) 25°C case temperature (see Note 2)
Continuous device dissipation at (or below) 25°C free air temperature (see Note 3)
Unclamped inductive load energy (see Note 4)
Operating junction temperature range
Storage temperature range
Lead temperature 3.2 mm from case for 10 seconds
TIP32
TIP32A
TIP32B
TIP32C
TIP32
TIP32A
TIP32B
TIP32C
VCBO
VCEO
VEBO
IC
ICM
IB
Ptot
Ptot
½LIC2
Tj
Tstg
TL
-80
-100
-120
-140
-40
-60
-80
-100
-5
-3
-5
-1
40
2
32
-65 to +150
-65 to +150
250
V
V
V
A
A
A
W
W
mJ
°C
°C
°C
NOTES: 1. This value applies for tp 0.3 ms, duty cycle 10%.
2. Derate linearly to 150°C case temperature at the rate of 0.32 W/°C.
3. Derate linearly to 150°C free air temperature at the rate of 16 mW/°C.
4. This rating is based on the capability of the transistor to operate safely in a circuit of: L = 20 mH, IB(on) = -0.4 A, RBE = 100 ,
VBE(off) = 0, RS = 0.1 , VCC = -20 V.
PRODUCT INFORMATION
Information is current as of publication date. Products conform to specifications in accordance
with the terms of Power Innovations standard warranty. Production processing does not
necessarily include testing of all parameters.
1

TIP32
TIP32, TIP32A,TIP32B, TIP32C
PNP SILICON POWER TRANSISTORS
JULY 1968 - REVISED MARCH 1997
electrical characteristics at 25°C case temperature
PARAMETER
TEST CONDITIONS
MIN TYP MAX
Collector-emitter
V(BR)CEO breakdown voltage
ICES
Collector-emitter
cut-off current
ICEO
IEBO
hFE
VCE(sat)
VBE
hfe
|hfe|
Collector cut-off
current
Emitter cut-off
current
Forward current
transfer ratio
Collector-emitter
saturation voltage
Base-emitter
voltage
Small signal forward
current transfer ratio
Small signal forward
current transfer ratio
IC = -30 mA
(see Note 5)
VCE = -80 V
VCE = -100 V
VCE = -120 V
VCE = -140 V
VCE = -30 V
VCE = -60 V
VEB = -5 V
VCE = -4 V
VCE = -4 V
IB = -375 mA
VCE = -4 V
VCE = -10 V
VCE = -10 V
IB = 0
VBE = 0
VBE = 0
VBE = 0
VBE = 0
IB = 0
IB = 0
IC = 0
IC = -1 A
IC = -3 A
IC = -3 A
IC = -3 A
IC = -0.5 A
IC = -0.5 A
TIP32
TIP32A
TIP32B
TIP32C
TIP32
TIP32A
TIP32B
TIP32C
TIP32/32A
TIP32B/32C
-40
-60
-80
-100
(see Notes 5 and 6)
(see Notes 5 and 6)
(see Notes 5 and 6)
f = 1 kHz
f = 1 MHz
25
10
20
3
-0.2
-0.2
-0.2
-0.2
-0.3
-0.3
-1
50
-1.2
-1.8
NOTES: 5. These parameters must be measured using pulse techniques, tp = 300 µs, duty cycle 2%.
6. These parameters must be measured using voltage-sensing contacts, separate from the current carrying contacts.
UNIT
V
mA
mA
mA
V
V
thermal characteristics
RθJC
RθJA
PARAMETER
Junction to case thermal resistance
Junction to free air thermal resistance
MIN TYP MAX UNIT
3.125 °C/W
62.5 °C/W
resistive-load-switching characteristics at 25°C case temperature
PARAMETER
TEST CONDITIONS
ton Turn-on time
toff Turn-off time
IC = -1 A
VBE(off) = 4.3 V
IB(on) = -0.1 A
RL = 30
IB(off) = 0.1 A
tp = 20 µs, dc 2%
Voltage and current values shown are nominal; exact values vary slightly with transistor parameters.
MIN TYP MAX UNIT
0.3 µs
1 µs
PRODUCT INFORMATION
2




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)