TISP61CAP3 PROGRAMMABLE OVERVOLTAGE PROTECTOR
Copyright © 1997, Power Innovations Limited, UK SEPTEMBER 1994 - REVISED S...
TISP61CAP3 PROGRAMMABLE OVERVOLTAGE PROTECTOR
Copyright © 1997, Power Innovations Limited, UK SEPTEMBER 1994 - REVISED SEPTEMBER 1997
PROGRAMMABLE SLIC OVERVOLTAGE PROTECTION
q
Programmable Voltage Triggered SCR with high Holding Current
Transistor Buffered Inputs for Low VGG current Rated for International Surge Wave Shapes
WAVE SHAPE 10/700 µs 10/1000 µs STANDARD CCITT IX K17 REA PE-60 ITSP A 38 30
P PACKAGE (TOP VIEW)
q
(Tip)
K1
1 2 3 4
8 7 6 5
K1 (Tip) A A (Ground) (Ground)
(Gate) G NC (Ring) K2
q
K2 (Ring)
MD6XAV
NC - No internal connection Terminal typical application names shown in parenthesis
description
The TISP61CAP3 is a programmable overvoltage protector designed to protect SLIC applications against lightning and transients induced by ac power lines. Normally the VGG (Gate) terminal will be connected to the negative supply rail of the SLIC When a negative transient exceeds the negative supply rail voltage of the SLIC it will cause the thyristor to crowbar, shunting the surge to ground. The high crowbar holding current prevents dc latchup as the transient subsides. Positive transients are clipped by diode action.
device symbol
K1 G K2
A
SD6XAE
Terminals K1, K2 and A correspond to the alternative line designators of T, R and G or A, B and C. The negative protection voltage is controlled by the voltage, VGG, applied to the G terminal.
absolute maximum ratings
RATING Non-repetitive peak on-state pulse current (see Notes 1, 2 and 3) 5/310 µs (CCITT I...