MULTIFUNCTION DUAL BRIDGE POWER AMPLIFIER
TDA7575
MULTIFUNCTION DUAL BRIDGE POWER AMPLIFIER WITH INTEGRATED DIGITAL DIAGNOSTICS
s s s s s s
s s s s s s s
DMOS P...
Description
TDA7575
MULTIFUNCTION DUAL BRIDGE POWER AMPLIFIER WITH INTEGRATED DIGITAL DIAGNOSTICS
s s s s s s
s s s s s s s
DMOS POWER OUTPUT NON-SWITCHING HI-EFFICIENCY SINGLE-CHANNEL 1Ω DRIVING CAPABILITY HIGH OUTPUT POWER CAPABILITY 2x28W/ 4Ω @ 14.4V, 1KHZ, 10% THD, 2x40W/4Ω EIAJ MAX. OUTPUT POWER 2x75W/2Ω, 1x150W/1Ω SINGLE-CHANNEL 1Ω DRIVING CAPABILITY – 84W UNDISTORTED POWER – FULL I2C BUS DRIVING WITH 4 ADDRESS POSSIBILITIES: – ST-BY, PLAY/MUTE, GAIN 12/26dB, FULL DIGITAL DIAGNOSTIC POSSIBILITY TO DISABLE THE I2C DIFFERENTAL INPUTS FULL FAULT PROTECTION DC OFFSET DETECTION TWO INDEPENDENT SHORT CIRCUIT PROTECTIONS CLIPPING DETECTOR PIN WITH SELECTABLE THRESHOLD (2%/10%) ST-BY/MUTE PINS
MULTIPOWER BCD TECHNOLOGY MOSFET OUTPUT POWER STAGE
PowerSO36 (Slug up) ORDERING NUMBER: TDA7575
Thanks to the DMOS output stage the TDA7575 has a very low distortion allowing a clear powerful sound. Among the features, its superior efficiency performance coming from the internal exclusive structure, makes it the most suitable device to simplify the thermal management in high power sets.The dissipated output power under average listening condition is in fact reduced up to 50% when compared to the level provided by conventional class AB solutions. This device is equipped with a full diagnostic array that communicates the status of each speaker through the I 2C bus. The TDA7575 has also the possibility of driving loads down to 1Ω paralleling the outputs into a single channel. It is also possible t...
Similar Datasheet