TDA8501

INTEGRATED CIRCUITS DATA SHEET TDA8501 PAL/NTSC encoder Preliminary specification File under Integrated Circuits, IC02 April 1993 Philips Semiconductors Preliminary specification PAL/NTSC encoder FEATURES Two input stages: R, G, B and −(R−Y), −(B−Y), Y with multiplexing Chrominance processing, highly integrated, includes low frequency filters for the colour difference signals, and after the modulator a bandpass filter Fully controlled modulator produces a signal according to the PAL or NTSC standard without adjustments A free running oscillator. Can be tuned by crystal or by an external frequency source Output stages with separated Y + SYNC and chrominance (Y + C, SVHS), and a CVBS output. Signal amplitudes are correct for 75 Ω driving via an external emitter follower. Internal generation of NTSC setup Sync separator circuit and pulse shaper, to generate the required pulses for the processing, clamping, blanking, FH/2, and burst pulse H/2 control pin. In PAL mode the internally generated H/2 is connected to this pin and the phase of this signal can be reset Internal bandgap reference. GENERAL DESCRIPTION TDA8501 The TDA8501 is a highly integrated PAL/NTSC encoder IC which is designed for use in all applications where R, G and B or Y, U and V signals require transformation to PAL or NTSC values.The specification of the input signals are fully compatible with the specification of those of the TDA8505 SECAM-encoder. ORDERING INFORMATION EXTENDED TYPE NUMBER...