Converter ADC. TDA8752 Datasheet

TDA8752 ADC. Datasheet pdf. Equivalent

Part TDA8752
Description Triple high speed Analog-to-Digital Converter ADC
Feature INTEGRATED CIRCUITS DATA SHEET TDA8752 Triple high speed Analog-to-Digital Converter (ADC) Product.
Manufacture NXP
Datasheet
Download TDA8752 Datasheet

INTEGRATED CIRCUITS DATA SHEET TDA8752 Triple high speed A TDA8752 Datasheet
INTEGRATED CIRCUITS DATA SHEET TDA8752A Triple high-speed TDA8752A Datasheet
INTEGRATED CIRCUITS DATA SHEET TDA8752B Triple high-speed TDA8752B Datasheet
Recommendation Recommendation Datasheet TDA8752 Datasheet




TDA8752
INTEGRATED CIRCUITS
DATA SHEET
TDA8752
Triple high speed Analog-to-Digital
Converter (ADC)
Product specification
Supersedes data of 1998 Aug 11
File under Integrated Circuits, IC02
1999 Mar 09



TDA8752
Philips Semiconductors
Triple high speed Analog-to-Digital
Converter (ADC)
Product specification
TDA8752
FEATURES
Triple 8-bit ADC
Sampling rate up to 100 MHz
IC controllable via a serial interface, which can be either
I2C-bus or 3-wire, selected via a TTL input pin
IC analog voltage input from 0.4 to 1.2 V (p-p) to
produce full-scale ADC input of 1 V (p-p)
3 clamps for programming a clamping code between
63.5 and +64 in steps of 12LSB
3 controllable amplifiers: gain controlled via the serial
interface to produce a full scale resolution of 12LSB
peak-to-peak
Amplifier bandwidth of 250 MHz
Low gain variation with temperature
PLL, controllable via the serial interface to generate the
ADC clock, which can be locked to a line frequency from
15 to 280 kHz
Integrated PLL divider
Programmable phase clock adjustment cells
Internal voltage regulators
TTL compatible digital inputs and outputs
Chip enable high-impedance ADC output
Power-down mode
Possibility to use up to four ICs in the same system,
using the I2C-bus interface, or more, using the 3-wire
serial interface
1 W power dissipation.
GENERAL DESCRIPTION
The TDA8752 is a triple 8-bit ADC with controllable
amplifiers and clamps for the digitizing of large bandwidth
RGB signals.
The clamp level, the gain and all of the other settings are
controlled via a serial interface (either I2C-bus or 3-wire
serial bus, selected via a logic input).
The IC also includes a PLL that can be locked on the
horizontal line frequency and generates the ADC clock.
The PLL jitter is minimized for high resolution PC graphics
applications. An external clock can also be input to the
ADC.
It is possible to set the TDA8752 serial bus address
between four fixed values, in the event that several
TDA8752 ICs are used in a system, using the I2C-bus
interface (for example, two ICs used in an odd/even
configuration).
APPLICATIONS
R, G and B high speed digitizing
LCD panels drive
LCD projection systems
VGA and higher resolutions
Using two ICs in parallel, higher display resolution can
be obtained; 200 MHz pixel frequency.
ORDERING INFORMATION
TYPE
NUMBER
TDA8752H/6
TDA8752H/8
PACKAGE
NAME
DESCRIPTION
plastic quad flat package; 100 leads (lead length 1.95 mm);
QFP100 body 14 × 20 × 2.8 mm
VERSION
SOT317-2
SAMPLING
FREQUENCY
(MHz)
60
100
1999 Mar 09
2





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)