TDA8786A

INTEGRATED CIRCUITS DATA SHEET TDA8786; TDA8786A 10-bit analog-to-digital interface for CCD cameras Product specification Supersedes data of 1997 May 20 File under Integrated Circuits, IC02 1997 Nov 17 Philips Semiconductors Product specification 10-bit analog-to-digital interface for CCD cameras FEATURES Correlated Double Sampling (CDS), AGC, soft clipper, pre-blanking, 10-bit ADC and reference regulator included Fully programmable via a 3-wire serial interface Sampling frequency up to 18 MHz AGC gain from 3.5 to 33.5 dB (in 0.1 dB steps) Programmable soft clipper for white compression (starting at 40% of the input signal) Standby mode available for each block for power saving applications (19 mW) 6 dB fixed gain analog output for analog iris control 8-bit and 10-bit DAC included for analog settings Low power consumption of only 475 mW (typ.) 5 V operation and 2.5 to 5 V operation for the digital outputs CDS control pulse: TDA8786 = HIGH; TDA8786A = LOW TTL compatible inputs, TTL and CMOS compatible outputs. QUICK REFERENCE DATA SYMBOL VCCA VCCD VCCO ICCA ICCD ICCO ADCres Vi(CDS)(p-p) GCDS fCLK(max) AGCdyn Ntot(rms) Ptot PARAMETER analog supply voltage digital supply voltage digital outputs supply voltage analog supply current digital supply current digital outputs supply current ADC resolution CDS input voltage (peak-to-peak value) CDS output amplifier gain maximum clock frequency AGC dynamic range total noise from CDS input to ADC output (RMS valu...