DatasheetsPDF.com

Filter specification. TFS110K2 Datasheet

DatasheetsPDF.com

Filter specification. TFS110K2 Datasheet






TFS110K2 specification. Datasheet pdf. Equivalent




TFS110K2 specification. Datasheet pdf. Equivalent





Part

TFS110K2

Description

TELEFILTER Filter specification



Feature


TFS110k2.doc version 1.2 21.11.01 VI TELEFILTER Measurement Condition Ambien t Temperature: Input Power Level: Termi nating impedances *: Input: Output: 23 °C 0 dBm 700 Ω || -13,7 pF 700 Ω | | -11,6 pF Filter specification TFS 1 10 K2 1/5 Characteristics Remark: Ref erence level for the relative attenuati on arel of the TFS 110 K2 is the minimu m of the pass band atte.
Manufacture

ETC

Datasheet
Download TFS110K2 Datasheet


ETC TFS110K2

TFS110K2; nuation amin. The minimum of the pass ba nd attenuation amin is defined as the i nsertion loss ae. The given values for the relative attenuation arel and for t he group delay ripple have to be reache d at the frequencies given below also i f the centre frequency fo is shifted du e to the temperature coefficient of fre quency TCf in the operating temperature range and due to .


ETC TFS110K2

a production tolerance for the centre fr equency fo. Data Insertion Loss (Refer ence level) Nominal Frequency Relative Attenuation fN fN ± fN ± fN ± fN ± fN ± 65 kHz ... fN + 65 kHz ... fN ± 400 kHz 800 kHz 1,6 MHz 10 MHz ... fN ... fN ± ... fN ± ... fN ± arel ae = amin typ. Value - Limit max. 9 dB fN 110,6 MHz 65 kHz 82,5 kHz 800 1,6 10 25 GD - max. 1 dB max..


ETC TFS110K2

1,5 dB min. min. min. min. 22 27 35 45 dB dB dB dB kHz MHz MHz MHz Group del ay Ripple fN ± 80 kHz Input Power Leve l 300 - ns max 500 max.+10 - 25 °C. ..+85 ns dBm °C Operating Temperatur e Range *) The terminating impedances depend on parasitics and q-values of ma tching elements and the board used, and are to be understood as reference valu es only. Should there.

Part

TFS110K2

Description

TELEFILTER Filter specification



Feature


TFS110k2.doc version 1.2 21.11.01 VI TELEFILTER Measurement Condition Ambien t Temperature: Input Power Level: Termi nating impedances *: Input: Output: 23 °C 0 dBm 700 Ω || -13,7 pF 700 Ω | | -11,6 pF Filter specification TFS 1 10 K2 1/5 Characteristics Remark: Ref erence level for the relative attenuati on arel of the TFS 110 K2 is the minimu m of the pass band atte.
Manufacture

ETC

Datasheet
Download TFS110K2 Datasheet




 TFS110K2
TFS110k2.doc
VI TELEFILTER
Filter specification
Measurement Condition
Ambient Temperature:
23 °C
Input Power Level:
0 dBm
Terminating impedances *:
Input:
700 || -13,7 pF
Output:
700 || -11,6 pF
version 1.2
21.11.01
TFS 110 K2 1/5
Characteristics
Remark:
Reference level for the relative attenuation arel of the TFS 110 K2 is the minimum of the pass band attenuation amin. The minimum of the pass
band attenuation amin is defined as the insertion loss ae. The given values for the relative attenuation arel and for the group delay ripple have to
be reached at the frequencies given below also if the centre frequency fo is shifted due to the temperature coefficient of frequency TCf in the
operating temperature range and due to a production tolerance for the centre frequency fo.
Data
Insertion Loss
(Reference level)
ae = amin
typ. Value
-
Limit
max. 9 dB
Nominal Frequency
fN
110,6 MHz
Relative Attenuation
arel
fN - 65 kHz ... fN + 65 kHz
fN ± 65 kHz ... fN ± 82,5 kHz
fN ± 400 kHz ... fN ± 800 kHz
fN ± 800 kHz ... fN ± 1,6 MHz
fN ± 1,6MHz ... fN ± 10 MHz
fN ± 10 MHz ... fN ± 25 MHz
- max. 1 dB
- max. 1,5 dB
- min. 22 dB
- min. 27 dB
- min. 35 dB
- min. 45 dB
Group delay
Ripple fN ± 80 kHz
GD
300 ns
max 500 ns
Input Power Level
- max.+10 dBm
Operating Temperature Range
- 25 °C...+85 °C
*) The terminating impedances depend on parasitics and q-values of matching elements and the board used, and are to be understood as
reference values only. Should there be additional questions do not hesitate to ask for an application note or contact our design team.
Generated:
Checked / approved:
VI TELEFILTER
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-52 / Fax: (+49) 3328 4784-30
E-Mail: tft@telefilter.com
Vectron International, Inc.
267 Lowell Road
Hudson, NH 03051 / USA
Tel: (603) 598-0070 Fax: (603) 598-0075
E-Mail: vti@vtinh.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.




 TFS110K2
TFS110k2.doc
VI TELEFILTER
Filter specification
Construction, pin connection and 50 - matching network
(All dimensions in mm)
TFS 110K2
tft N44
Datecode
version 1.2
21.11.01
TFS 110 K2 2/5
C1 C2
VI TELEFILTER
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-52 / Fax: (+49) 3328 4784-30
E-Mail: tft@telefilter.com
Vectron International, Inc.
267 Lowell Road
Hudson, NH 03051 / USA
Tel: (603) 598-0070 Fax: (603) 598-0075
E-Mail: vti@vtinh.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.




 TFS110K2
TFS110k2.doc
VI TELEFILTER
Filter specification
version 1.2
21.11.01
TFS 110 K2 3/5
Stability characteristics
After the following tests the filter shall meet the whole specification:
1. Shock:
500g, 18 ms, half sine wave, 3 shocks each plane;
DIN IEC 68 T2 - 27
2. Vibration:
10 Hz to 500 Hz, 0,35 mm or 5g respectively, 1 octave per min, 10 cycles per plan, 3 plans;
DIN IEC 68 T2 - 6
3. Damp heat:
(cycle)
25 °C to 55°C / 95% r.H. / 10 cycles
DIN IEC 68 - 2 – 30 Db
4. Resistance to
solder heat (reflow):
5. Density
max. 2 times reflow process;
for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4;
min. 1 E-4mbar*l/s
Packing
Tape & Reel:
IEC 286 - 3, with exception of value for N and minimum bending radius;
tape type II, embossed carrier tape with top cover tape on the upper side;
max. pieces of filters per reel:
Reel of empty components at start:
Reel of empty components at start including leader:
Trailer
1700
min 300 mm
min 500 mm
min 300 mm
Tape (all dimensions in mm)
W : 24 ± 0,3
Po : 4 ± 0,1
Do : 1,5 + 0,1
D1 : 1,5 + 0,1
E : 1,75 ± 0,1
F : 11,5 ± 0,1
G (min) : 0,6
21,4 ± 0,1
P2 : 2 ± 0,1
P1 : 12 ± 0,1
D1(min) : 1,5
Ao : 7,1 ± 0,2
Bo : 13,9 ± 0,2
COVER TAPE
EMBOSSED CARRIER TAPE
Do Po
P2
Ao
D1
Bo
E
F
W
G
P1
Reel (all dimensions in mm):
A : 330
W1 :
W2 (m ax) :
24,4 +2
3 0 ,4
N (m in) : >= 60
C : 13 + 0,5/ -0,2
C
A
W2
N
W1
The minimum bending radius is 45 mm. The mounting surface of the filters faces the bottom side of the embossed carrier tape.
The marking of the filters is able to read if the view is directed on the upper side of the carrier tape with the sprocket holes on the
right side of the tap
VI TELEFILTER
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-52 / Fax: (+49) 3328 4784-30
E-Mail: tft@telefilter.com
Vectron International, Inc.
267 Lowell Road
Hudson, NH 03051 / USA
Tel: (603) 598-0070 Fax: (603) 598-0075
E-Mail: vti@vtinh.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.



Recommended third-party TFS110K2 Datasheet






@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)