DatasheetsPDF.com

Filter specification. TFS150N Datasheet

DatasheetsPDF.com

Filter specification. TFS150N Datasheet






TFS150N specification. Datasheet pdf. Equivalent




TFS150N specification. Datasheet pdf. Equivalent





Part

TFS150N

Description

Filter specification



Feature


File name: Tfs150N.doc Version 3.2 13. 01.2003 VI TELEFILTER 1. Measurement c ondition Ambient temperature TA: Input power level: Terminating impedances at fc * ) : 23 °C 0 dBm. for input: for o utput: Filter specification TFS 150N 1/5 280 Ω ⎟⎢ - 22,7 pF. 210 Ω ⎟⎢ - 27,0 pF. 2. Characteristics Remark: Reference level for the relativ e attenuation arel of the TFS 1.
Manufacture

ETC

Datasheet
Download TFS150N Datasheet


ETC TFS150N

TFS150N; 50N is the minimum of the pass band atte nuation amin. The minimum of the pass b and attenuation amin is defined as the insertion loss ae. The reference freque ncy fc is the arithmetic mean value of the upper and lower frequencies at the 3 dB filter attenuation level relative to the insertion loss ae. The temperatu re coefficient of frequency Tcf is vali d both for the ref.


ETC TFS150N

erence frequency fc and the frequency re sponse of the filter in the operating t emperature range. The frequency shift o f the filter in the operating temperatu re range is not included in the product ion tolerance scheme. Data Insertion l oss (reference level) Centre frequency at ambient temperature TA Pass band Pas s band ripple ( p–p ) : Bandwidth at ambient temperature .


ETC TFS150N

TA 1 dB 3 dB 25 dB 40 dB 45 dB Relative attenuation fC ... fC ± fC ± 2,05 MHz ... fC ± fC ± 2,65 MHz ... fC ± fC ± 3,0 MHz ... fC ± fC ± 3,2 MHz ... fC ± 2,05 MHz 2,30 MHz 3,0 MHz 3,2 MHz 100 MHz arel ae = amin typ. value 24, 7 150,01 4,50 0,5 dB MHz MHz dB tolera nce / limit max. 25 dB MHz MHz dB fc P B 150,0 ± 0,1 fC ... fC ± 2,05 max. 1 4,62 4,77 5,22 5,33 5,36 .

Part

TFS150N

Description

Filter specification



Feature


File name: Tfs150N.doc Version 3.2 13. 01.2003 VI TELEFILTER 1. Measurement c ondition Ambient temperature TA: Input power level: Terminating impedances at fc * ) : 23 °C 0 dBm. for input: for o utput: Filter specification TFS 150N 1/5 280 Ω ⎟⎢ - 22,7 pF. 210 Ω ⎟⎢ - 27,0 pF. 2. Characteristics Remark: Reference level for the relativ e attenuation arel of the TFS 1.
Manufacture

ETC

Datasheet
Download TFS150N Datasheet




 TFS150N
File name: Tfs150N.doc
VI TELEFILTER
Filter specification
Version 3.2
TFS 150N
13.01.2003
1/5
1. Measurement condition
Ambient temperature TA:
Input power level:
Terminating impedances at fc * ) :
23 °C
0 dBm.
for input:
for output:
280 ⎟⎢ - 22,7 pF.
210 ⎟⎢ - 27,0 pF.
2. Characteristics
Remark: Reference level for the relative attenuation arel of the TFS 150N is the minimum of the pass band attenuation amin. The minimum of
the pass band attenuation amin is defined as the insertion loss ae. The reference frequency fc is the arithmetic mean value of the upper and lower
frequencies at the 3 dB filter attenuation level relative to the insertion loss ae. The temperature coefficient of frequency Tcf is valid both for the
reference frequency fc and the frequency response of the filter in the operating temperature range. The frequency shift of the filter in the operating
temperature range is not included in the production tolerance scheme.
Data
typ. value
tolerance / limit
Insertion loss (reference level)
ae = amin
Centre frequency at ambient temperature TA fc
Pass band
Pass band ripple ( p–p ) :
PB
Bandwidth at ambient temperature TA
1 dB
3 dB
25 dB
40 dB
45 dB
Relative attenuation
fC ... fC ±
fC ± 2,05 MHz ... fC ±
fC ± 2,65 MHz ... fC ±
fC ± 3,0 MHz ... fC ±
fC ± 3,2 MHz ... fC ±
2,05 MHz
2,30 MHz
3,0 MHz
3,2 MHz
100 MHz
arel
Group delay ( mean value in PB )
Group delay ripple in PB:
Deviation from linear phase in PB (p-p):
24,7 dB
150,01 MHz
4,50 MHz
0,5 dB
4,62
4,77
5,22
5,33
5,36
MHz
MHz
MHz
MHz
MHz
-
-
-
46
50...70
dB
dB
3,92 µs
100 ns
2,7 degree
max. 25
150,0 ± 0,1
dB
MHz
fC ... fC ± 2,05 MHz
max. 1
dB
min. 4,1 MHz
min. 4,6 MHz
max. 5,3 MHz
max. 6,0 MHz
max. 6,4 MHz
max. 1
max. 3
min. 25
min. 40
min. 45
max. 4,5
max. 120
-
dB
dB
dB
dB
dB
µs
ns
Input VSWR (S11) in PB :
Output VSWR (S22) in PB :
Triple transit attenuation compared to main signal
Crosstalk
Input power level
15
15
50
60...70
dB
dB
dB
dB
-
-
-
-
max. 20
dBm
Frequency inversion temperature ( To )
Temperature coefficient of frequency ( Tcf )
Frequency deviation of fc over temperature: ** )
Operating temperature range ( OTR )
Storage temperature range
20 °C
- 0,036 ppm/K²
fc(Hz) = Tcf(ppm/K) x (T - To)² x fO (MHz)
-
-
- - 33 °C ... + 85 °C
- - 40 °C ... + 85 °C
*) The terminating impedances depend on parasitics and q-values of matching elements and the board used, and are to be understood as
reference values only. Should there be additional questions do not hesitate to ask for an application note or contact our design team.
**) fO = fTo is reference frequency fc at frequency inversion temperature (To )
generated:
checked / approved:
W. Dunzow
Dr. Bert Wall
VI TELEFILTER
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: tft@telefilter.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed
as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.




 TFS150N
File name: Tfs150N.doc
VI TELEFILTER
Filter specification
3 Construction and pin connection :
35 Max.
(All dimensions in mm)
Version 3.2
TFS 150N
13.01.2003
2/5
TFS 150 N
R22
Date code
ø 0,45
ø1
Date code:
N
P
R
....
Year + week
2001
2002
2003
....
2,54
11 X 2,54 = 27,94
Pin 2
Input.
Pin 3 Input RF return.
Pin 14 Output.
Pin 15 Output RF return.
Pin 1, 4, 9, 12, 13, 16, 21, 24 –
- Package ground.
Pin 10, 11, 22, 23 not connected.
4. 50 matching network ( for details refer to application note ) :
L1
50
L3
Scheme 1
L1
L2
L4
50
50
C1
Scheme 2
L2
50
C2
For final test we use scheme 1.
VI TELEFILTER
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: tft@telefilter.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed
as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.




 TFS150N
File name: Tfs150N.doc
VI TELEFILTER
Filter specification
Version 3.2
TFS 150N
13.01.2003
3/5
5. Stability characteristics :
After the following tests the filter shall meet the whole specification:
1. Shock:
500g, 18 ms, half sine wave, 3 shocks each plane;
DIN IEC 68 T2 - 27
2. Vibration:
10 Hz to 500 Hz, 0,35 mm or 5g respectively, 1 octave per min, 10 cycles per plan, 3 plans;
DIN IEC 68 T2 - 6
3. Change of
temperature
-55 °C to 125°C / 30 min. each / 10 cycles
DIN IEC 68 part 2 – 14 Test N
4. Resistance to
solder heat (reflow):
reflow possible: twice max.;
for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4;
VI TELEFILTER
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: tft@telefilter.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed
as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.



Recommended third-party TFS150N Datasheet






@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)