Gain Block Amplifier
T
R
I
Q
U
I
N
T
S
E
M
I
C
O N
D
U
C
T O
R ,
I
N
C .
TGA8035-SCC
Gain Block Amplifier
q q q q q q...
Description
T
R
I
Q
U
I
N
T
S
E
M
I
C
O N
D
U
C
T O
R ,
I
N
C .
TGA8035-SCC
Gain Block Amplifier
q q q q q q
PHOTO ENLARGEMENT
6 to 18- GHz Frequency Range 13- dB Typical Gain 2.2:1 Typical Input/Output SWR
8035
12.5- dBm Typical Output Power at 1 -dB Gain Compression 5 - dB Typical Noise Figure 2,4892 x 2,0574 x 0,1143 mm (0.098 x 0.081 x 0.0045 in.)
DESCRIPTION
The TriQuint TGA8035 - SCC is a two - stage GaAs monolithic amplifier designed for use as a broadband general-purpose gain block. T wo 300 - µm gate - width FETs provide a 13- dB typical gain and a 5- dB noise figure from 6 to 18- GHz. Typical output power at 1- dB gain compression is 12.5- dBm. Shunt feedback is used around each active device to improve gain flatness and standing - wave ratio (SWR). Ground is provided to the circuitry through vias to the backside metallization. The TGA8035-SCC amplifier is suitable for a variety of broadband electronic warfare (EW) applications. The combination of gain, power, and noise figure makes this device an exceptional post amplifier following a low-noise amplifier. Bond pad and backside metallization is gold plated for compatibility with eutectic alloy attachment methods as well as thermocompression and thermosonic wire- bonding processes. The TGA8035 - SCC is supplied in chip form and is readily assembled using automated equipment.
TriQuint Semiconductor, Inc.
Texas Facilities
(972) 995-8465
www.triquint.com
TGA8035-SCC
TYPICAL SMALL-SIGNAL POW...
Similar Datasheet