DatasheetsPDF.com

TGL41-180A Dataheets PDF



Part Number TGL41-180A
Manufacturers General Semiconductor
Logo General Semiconductor
Description SURFACE MOUNT TRANSZORB TRANSIENT VOLTAGE SUPPRESSOR
Datasheet TGL41-180A DatasheetTGL41-180A Datasheet (PDF)

TGL41-6.8 THRU TGL41-200A SURFACE MOUNT TRANSZORB™ TRANSIENT VOLTAGE SUPPRESSOR Breakdown Voltage - 6.8 to 200 Volts Peak Pulse Power - 400 Watts FEATURES DO-213AB SOLDERABLE ENDS 1st BAND D2 D1= 0.105 0.095 (2.67) (2.41) 0.022 (0.56) 0.018 (0.46) 0.205 (5.2) 0.185(4.7) 1st band denotes type and positive end (cathode) 0 D2 = D1 + - 0.008 (0.20) ♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ For surface mounted applications ♦ Glass passivated junction ♦ Exce.

  TGL41-180A   TGL41-180A


Document
TGL41-6.8 THRU TGL41-200A SURFACE MOUNT TRANSZORB™ TRANSIENT VOLTAGE SUPPRESSOR Breakdown Voltage - 6.8 to 200 Volts Peak Pulse Power - 400 Watts FEATURES DO-213AB SOLDERABLE ENDS 1st BAND D2 D1= 0.105 0.095 (2.67) (2.41) 0.022 (0.56) 0.018 (0.46) 0.205 (5.2) 0.185(4.7) 1st band denotes type and positive end (cathode) 0 D2 = D1 + - 0.008 (0.20) ♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ For surface mounted applications ♦ Glass passivated junction ♦ Excellent clamping capability ♦ Low incremental surge resistance ♦ Fast response time typically less than 1.0ps from 0 Volts to V(BR) ♦ 400W peak pulse capability with a 10/1000µs waveform, repetition rate (duty cycle): 0.01% ♦ For devices with V(BR)≥10V, ID are typically less than 1.0µA ♦ High temperature soldering guaranteed: 250°C/10 seconds at terminals MECHANICAL DATA Case: JEDEC DO-213AB molded plastic body over passivated junction Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: Blue bands denotes the cathode which is positive with respect to the anode under normal TVS operation Mounting Position: Any Weight: 0.116 gram, 0.0046 ounce Dimensions in inches and (millimeters) Available in uni-directional only MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. RATINGS SYMBOL VALUE UNITS Peak pulse power dissipation with a 10/1000µs waveform (NOTE 1, FIG. 1) Steady state power dissipation at TL=75°C (NOTE 2) Peak pulse current with a 10/1000µs waveform (NOTE 1, FIG. 3) PPPM PM(AV) IPPM Minimum 400 1.0 SEE TABLE 1 Watts Watt Amps Peak forward surge current, 8.3ms single half sine-wave superimposed on rated load for unidirectional only (JEDEC Method) (NOTE 3) Maximum instantaneous forward voltage at 25A for unidirectional only Operating junction and storage temperature range IFSM 40.0 Amps VF TJ, TSTG 3.5 -55 to +150 Volts °C NOTES: (1) Non-repetitive current pulse, per Fig. 3 and derated above TA=25°C per Fig. 2 (2) Mounted on copper pads to each terminal of 0.31 in (8.0 mm ) per Fig. 5 (3) Measured at 8.3ms single half sine-wave or equivalent square wave duty cycle=4 pulses per minute maximum 2 2 1/20/99 ELECTRICAL CHARACTERISTICS at (TA=25°C unless otherwise noted) TABLE 1 Breakdown Voltage V(BR) (Volts) (NOTE 1) Device Type MIN MAX Stand-off Voltage VWM (NOTE 4) Test Current at IT (mA) Maximum Reverse Leakage at VWM ID (µA) (NOTE 4) Maximum Peak Pulse Current IPPM (NOTE 2) (Volts) (Amps) Maximum Clamping Voltage at IPPM VC (Volts) Maximum Temperature Coefficient of V(BR) (% / °C) TGL41-6.8 TGL41-6.8A TGL41-7.5 TGL41-7.5A TGL41-8.2 TGL41-8.2A TGL41-9.1 TGL41-9.1A TGL41 -10 TGL41 -10A TGL41 -11 TGL41 -11A TGL41-12 TGL41-12A TGL41-13 TGL41-13A TGL41-15 TGL41-15A TGL41-16 TGL41-16A TGL41-18 TGL41-18A TGL41-20 TGL41-20A TGL41-22 TGL41-22A TGL41-24 TGL41-24A TGL41-27 TGL41-27A TGL41-30 TGL41-30A TGL41-33 TGL41-33A TGL41-36 TGL41-36A TGL41-39 TGL41-39A TGL41-43 TGL41-43A 6.12 6.45 6.75 7.13 7.38 7.79 8.19 8.65 9.00 9.50 9.90 10.5 10.8 11.4 11.7 12.4 13.5 14.3 14.4 15.2 16.2 17.1 18.0 19.0 19.8 20.9 21.6 22.8 24.3 25.7 27.0 28.5 29.7 31.4 32.4 34.2 35.1 37.1 38.7 40.9 7.48 7.14 8.25 7.88 9.02 8.61 10.0 9.55 11.0 10.5 12.1 11.6 13.2 12.6 14.3 13.7 16.5 15.8 17.6 16.8 19.8 18.9 22.0 21.0 24.2 23.1 26.4 25.2 29.7 28.4 33.0 31.5 36.3 34.7 39.6 37.8 42.9 41.0 47.3 45.2 10 10 10 10 10 10 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 5.50 5.80 6.05 6.40 6.63 7.02 7.37 7.78 8.10 8.55 8.92 9.40 9.72 10.2 10.5 11.1 12.1 12.8 12.9 13.6 14.5 15.3 16.2 17.1 17.8 18.8 19.4 20.5 21.8 23.1 24.3 25.6 26.8 28.2 29.1 30.8 31.6 33.3 34.8 36.8 1000 1000 500 500 200 200 50.0 50.0 10.0 10.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 37.0 38.1 34.2 35.4 32.0 33.1 29.0 29.9 26.7 27.6 24.7 25.6 23.1 24.0 21.1 22.0 18.2 18.9 17.0 17.8 15.1 15.9 13.7 14.4 12.5 13.1 11.5 12.0 10.2 10.7 9.2 9.7 8.4 8.8 7.7 8.0 7.1 7.4 6.5 6.7 10.8 10.5 11.7 11.3 12.5 12.1 13.8 13.4 15.0 14.5 16.2 15.6 17.3 16.7 19.0 18.2 22.0 21.2 23.5 22.5 26.5 25.2 29.1 27.7 31.9 30.6 34.7 33.2 39.1 37.5 43.5 41.4 47.7 45.7 52.0 49.9 56.4 53.9 61.9 59.3 0.060 0.060 0.064 0.064 0.068 0.068 0.071 0.071 0.076 0.076 0.078 0.078 0.081 0.081 0.084 0.084 0.087 0.087 0.089 0.089 0.091 0.091 0.093 0.093 0.095 0.095 0.097 0.097 0.099 0.099 0.100 0.100 0.101 0.101 0.102 0.102 0.103 0.103 0.104 0.104 ELECTRICAL CHARACTERISTICS at (TA=25°C unless otherwise noted) TABLE 1 (Cont’d) Breakdown Voltage V(BR) Volts (NOTE 1) Device Type MIN MAX Maximum Reverse Leakage at VWM ID (µA) Maximum Peak Pulse Current IPPM (NOTE 2) Test Current at IT (mA) Stand-off Voltage VWM (Volts) (Amps) Maximum Clamping Voltage at IPPM VC (Volts) Maximum Temperature Coefficient of V(BR) (% / °C) TGL41-47 TGL41-47A TGL41-51 TGL41-51A.


TGL41-180 TGL41-180A TGL41-180A


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)