|
|
with LCD-driver. P83C434 Datasheet |
|
|
|
INTEGRATED CIRCUITS
DATA SHEET
P83C434; P83C834
8-bit microcontrollers with
LCD-driver
Product specification
Supersedes data of 1996 Oct 16
File under Integrated Circuits, IC20
1997 Jul 03
|
Philips Semiconductors
8-bit microcontrollers with LCD-driver
Product specification
P83C434; P83C834
CONTENTS
1 FEATURES
1.1 Differences from the 80C51 core
1.2 Memory
2 GENERAL DESCRIPTION
3 ORDERING INFORMATION
4 BLOCK DIAGRAM
5 PINNING INFORMATION
5.1 Pinning
5.2 Pin description
6 FUNCTIONAL DESCRIPTION
6.1 Input/Output (I/O)
6.2 Oscillator
6.3 Interrupts
6.4 Reduced power modes
6.5 Reset
6.6 Special Function Registers (SFRs)
6.7 LCD driver unit
7 LIMITING VALUES
8 HANDLING
9 DC CHARACTERISTICS
10 LCD DRIVER CHARACTERISTICS
11 AC CHARACTERISTICS
11.1 Characteristic curves
12 APPLICATION INFORMATION
13 PACKAGE OUTLINE
14 SOLDERING
14.1 Introduction
14.2 SDIP
14.3 QFP
15 DEFINITIONS
16 LIFE SUPPORT APPLICATIONS
1997 Jul 03
2
|
Philips Semiconductors
8-bit microcontrollers with LCD-driver
Product specification
P83C434; P83C834
1 FEATURES
• 80C51 type core
• System clock derived from an internal free running
Current Controlled Oscillator (CCO); no external
components required. Clock frequency can be adjusted
by software.
• Optimized for EMC (Electromagnetic Compatibility)
• Clock frequency fclk = 1 to 12 MHz
• 12 I/O lines, quasi-bidirectional
• Gated interrupt on 8 I/O lines:
– P0.0 to P0.3 when LOW
– P0.4 to P0.7 when LOW or HIGH
• LCD driver clock, 32 kHz, which also provides the time
base for a Real Time Clock
• 1-second interrupt by internal 15-bit counter
• On-chip Liquid Crystal Display (LCD) drivers with
26 outputs, comprising:
– 22, 23 or 24 segment drivers
– 1 to 4 backplanes
• LCD multiplexing rates: 1 : 1 (static), 1 : 2, 1 : 3 or 1 : 4
• Operating temperature: −40 to +85 °C
• Single power supply:
– Operating voltage: 3.5 to 5.5 V
– Power-down mode: 1.8 V.
1.1 Differences from the 80C51 core
• Port 0 quasi-bidirectional instead of open-drain.
• No external memory connection.
Signals EA, ALE and PSEN are not present.
• Port 1, Port 2 (pins P2.4 to P2.7) and Port 3 are not
present.
• Timer 0 external input replaced by a direct connection to
the 32 kHz oscillator output.
• Timer 1 external input is connected to pin P0.0 (Port 0);
alternate function of P0.0.
• Standard serial interface and its control register is not
present.
• Adjustable on-chip oscillator without external
components.
• Wake-up from Power-down mode is also possible by
means of an interrupt.
• Extended external interrupts.
1.2 Memory
Table 1 ROM/RAM sizes
DEVICE
P83C434
P83C834
MEMORY
ROM
4 kbytes
8 kbytes
RAM
128 bytes
256 bytes
2 GENERAL DESCRIPTION
The P83C434 and P83C834 are low-cost microcontrollers
of the 80C51 family, with LCD drivers.
Main application is in the user-interface (keypad, display)
of consumer products, e.g. portable radios, CD-players,
etc.
This data sheet details the specific properties of the
P83C434 and P83C834. The shared characteristics of the
80C51 family of microcontrollers are described in “Data
Handbook IC20”, which should be read in conjunction with
this data sheet.
3 ORDERING INFORMATION
TYPE NUMBER
P83C434CFP;
P83C834CFP
PACKAGE
NAME
DESCRIPTION
VERSION
SDIP42 plastic shrink dual in-line package; 42 leads (600 mil) SOT270-1
QFP44 plastic quad flat package; 44 leads (lead length 1.3 mm); SOT307-2
body 10 × 10 × 1.75 mm
TEMP.
RANGE (°C)
−40 to +85
1997 Jul 03
3
|
| @ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact) |