TVSarray Series. SMDA05C-8 Datasheet

SMDA05C-8 Series. Datasheet pdf. Equivalent

SMDA05C-8 Datasheet
Recommendation SMDA05C-8 Datasheet
Part SMDA05C-8
Description TVSarray Series
Feature SMDA05C-8; 8700 E. Thomas Road Scottsdale, AZ 85251 Tel: (480) 941-6300 Fax: (480) 947-1503 SMDA03C-8 thru SM.
Manufacture Microsemi Corporation
Datasheet
Download SMDA05C-8 Datasheet




Microsemi Corporation SMDA05C-8
8700 E. Thomas Road
Scottsdale, AZ 85251
Tel: (480) 941-6300
Fax: (480) 947-1503
SMDA03C-8
thru
SMDA24C-8
TVSarraySeries
DESCRIPTION (300 watt)
This 14 pin 8 line Bi-directional array is designed for use in
applications where protection is required at the board level from
voltage transients caused by electrostatic discharge (ESD) as defined
in IEC 1000-4-2, electrical fast transients (EFT) per IEC 1000-4-4 and
effects of secondary lighting.
These TRANSIENT VOLTAGE SUPPRESSOR (TVS) Diode Arrays
have a peak power of 300 watts for an 8/20 µsec pulse and are designed to protect 3.0/3.3 volt
components such as DRAM’s, SRAM’s, CMOS, HCMOS, HSIC, and low voltage interfaces up to 24 volts.
FEATURES
Protects 3.0/3.3 up through 24V Components
Protects 8 lines Bi-directional
Provides electrically isolated protection
SO-14 Packaging
MECHANICAL
Molded SO-14 Surface Mount
Weight: 0.127 grams (approximate)
Body Marked with Logo, and device number
Pin #1 defined by DOT on top of package
Encapsulation meets UL 94V-0
MAXIMUM RATINGS
Operating Temperatures: -550C to +1500C
Storage Temperature: -550C to +1500C
Peak Pulse Power: 300 Watts (8/20 µsec, Figure 1)
Pulse Repetition Rate: <.01%
PACKAGING
Tape & Reel EIA Standard 481-1-A
13 inch reel 2,500 (OPTIONAL)
Carrier tubes 55 pcs per (STANDARD)
ELECTRICAL CHARACTERISTICS@ 250C Unless otherwise specified
PART
NUMBER
SMDA03C-8
SMDA05C-8
SMDA12C-8
SMDA15C-8
SMDA24C-8
DEVICE
MARKING
SDL8
SDB8
SDD8
SDF8
SDH8
STAND
OFF
VOLTAG
E
VWM
VOLTS
MAX
3.3
5.0
12.0
15.0
24.0
BREAKDOWN
VOLTAGE
VBR
@1 mA
VOLTS
MIN
4
6.0
13.3
16.7
26.7
CLAMPING
VOLTAGE
VC
@ 1 Amp
(FIGURE 2)
VOLTS
MAX
7.0
9.8
19.0
24.0
43.0
CLAMPING
VOLTAGE
VC
@ 5 Amp
(FIGURE 2)
VOLTS
MAX
9.0
11
24
30
55
LEAKAGE
CURRENT
ID
@ VWM
µA
MAX
200
40
1
1
1
CAPACITANCE
(f=1 MHz)
@0V
C
pF
TYP
300
200
75
50
35
TEMPERATURE
COEFFICIENT
OF VBR
áVBR
mV/°C
MAX
-5
1
8
11
28
NOTE: Transient Voltage Suppression (TVS) product is normally selected based on its stand off voltage
VWM. Product selected voltage should be equal to or greater than the continuous peak operating voltage of
the circuit to be protected.
Application: The SMDAXXC-8 product is designed for transient voltage suppression protection of
components at the board level. It is an ideal product to be used for protection of I/O Transceivers.
MSC0976.PDF
ISO 9001 CERTIFIED
REV F 7/06/2000



Microsemi Corporation SMDA05C-8
WAVE FORMS
SMDA03C-8 thru SMDA24C-8
FIGURE 1
Peak Pulse Power Vs Pulse Time
MOUNTING PAD SO-14
100
50
Peak Value -- Ipp
8 X 20 Waveform
Half-Value
--
Ipp
2
0
0 10 20 30
t
td
t -- Time in microsec
FIGURE 2
Pulse Wave Form
CIRCUIT DIAGRAM
SO-14 PACKAGE
MSC0976.PDF
ISO 9001 CERTIFIED
REV F 7/06/2000





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)