SMDA12C | Micro Commercial Components
TVS
MCC
omponents 21201 Itasca Street Chatsworth !"# $
% !"#
SMDA/B03 THRU SMDA/B24C
TVSarray™ Series
DESCRIPTION (300 and 500 watt)
This 8 pin 4 line Unidirectional or Bidirectional array is designed for use in applications where protection is required at the board level from voltage transients caused by electrostatic discharge (ESD) as.
- SMDA12C | SMC Diode
- TVS ARRAY SERIES
- Technical Data Data Sheet N0297, Rev. B
SMDA03C THRU SMDA24C TVS ARRAY SERIES
SMDA03C THRU
SMDA24C
.
- Technical Data Data Sheet N0297, Rev. B
SMDA03C THRU SMDA24C TVS ARRAY SERIES
SMDA03C THRU
SMDA24C
SO-8
Description
The SMDAXXC series of TVS array have been designed to provide bidirectional protection for sensitive electronics from damage due to voltage transients caused by electrostatic discharge (ESD), electrical fast transients (EFT), lightning and other voltage-induced transient events. The device can be used to protect combinations of f.
- SMDA12C | Leiditech
- Bidirectional TVS Diode Array
- Features
● Ultra low leakage: nA level ● Operating voltage: 12V ● Low clamping voltage ● Complies wi.
- Features
● Ultra low leakage: nA level ● Operating voltage: 12V ● Low clamping voltage ● Complies with following standards:
– IEC 61000-4-2 (ESD) immunity test Air discharge: ±15kV Contact discharge: ±8kV
– IEC61000-4-4 (EFT) 40A (5/50ns) – IEC61000-4-5 (Lightning) 12A (8/20μs) ● RoHS Compliant
Applications
● USB 2.0 power and data line ● Set-top box and digital TV ● Digital video interface (DVI) ● Notebook Computers ● SIM Ports ● 10/100 Ethernet.
- SMDA12C | Microsemi
- 4 LINE TVSarray
- SCOTTSDALE DIVISION
SMDA03 thru SMDA24C, e3 and SMDB03 thru SMDB24C, e3
4 LINE TVSarray ™
WWW.Micr.
- SCOTTSDALE DIVISION
SMDA03 thru SMDA24C, e3 and SMDB03 thru SMDB24C, e3
4 LINE TVSarray ™
WWW.Microsemi .COM
DESCRIPTION
This TRANSIENT VOLTAGE SUPPRESSOR (TVS) array is packaged in an SO-8 configuration giving protection to 4 unidirectional or bi-directional data or interface lines. It is designed for use in applications where protection is required at the board level from voltage transients caused by electrostatic discharge (ESD) as defined .
- SMDA12C | ON Semiconductor
- Bi-directional TVS Array
- SMDA05C Series
Bi-directional TVS Array for High-Speed Data Line Protection
The SMDA05C transient v.
- SMDA05C Series
Bi-directional TVS Array for High-Speed Data Line Protection
The SMDA05C transient voltage suppressor series is designed to protect equipment attached to up to four high speed communication lines from ESD, EFT, and lightning.
Features:
• SO−8 Package • Peak Power − 300 W 8 x 20 mS • ESD Rating:
IEC 61000−4−2 (ESD) ±15 kV (air) ±8 kV (contact) IEC 61000−4−4 (EFT) 40 A (5/50 ns) IEC 61000−4−5 (lightning) 12 A (8/20 ms)
• UL Flammabi.
- SMDA12C | Protek Devices
- (SMDA03 - SMDA36C) STANDARD CAPACITANCE TVS ARRAY
- 05031
Only One Name Means ProTek’Tion™
500 WATT MULTI-LINE TVS ARRAY
SMDA03 - SMDA36C
DESCRIPTION.
- 05031
Only One Name Means ProTek’Tion™
500 WATT MULTI-LINE TVS ARRAY
SMDA03 - SMDA36C
DESCRIPTION
The SMDAxx and SMDAxxC Series are multi-line transient voltage suppressor arrays that provides board level protection for standard TTL and MOS bus line applications against the damaging effects of ESD, tertiary lightning and switching transients. The SMDA Series has a peak pulse power rating of 500 Watts for an 8/20µs waveshape. This device series.
