SMDA24C-8

8700 E. Thomas Road Scottsdale, AZ 85251 Tel: (480) 941-6300 Fax: (480) 947-1503 SMDA03C-8 thru SMDA24C-8 TVSarray™ Series DESCRIPTION (300 watt) This 14 pin 8 line Bi-directional array is designed for use in applications where protection is required at the board level from voltage transients caused by electrostatic discharge (ESD) as defined in IEC 1000-4-2, electrical fast transients (EFT) per IEC 1000-4-4 and effects of secondary lighting. These TRANSIENT VOLTAGE SUPPRESSOR (TVS) Diode Arrays have a peak power of 300 watts for an 8/20 µsec pulse and are designed to protect 3.0/3.3 volt components such as DRAM’s, SRAM’s, CMOS, HCMOS, HSIC, and low voltage interfaces up to 24 volts. FEATURES Protects 3.0/3.3 up through 24V Components Protects 8 lines Bi-directional Provides electrically isolated protection SO-14 Packaging MECHANICAL Molded SO-14 Surface Mount Weight: 0.127 grams (approximate) Body Marked with Logo, and device number Pin #1 defined by DOT on top of package Encapsulation meets UL 94V-0 MAXIMUM RATINGS Operating Temperatures: -550 C to +1500 C Storage Temperature: -550 C to +1500 C Peak Pulse Power: 300 Watts (8/20 µ sec, Figure 1) Pulse Repetition Rate: <.01% PACKAGING Tape & Reel EIA Standard 481-1-A 13 inch reel 2,500 (OPTIONAL) Carrier tubes 55 pcs per (STANDARD) ELECTRICAL CHARACTERISTICS@ 250C Unless otherwise specified STAND OFF VOLTAG E VWM VOLTS MAX SMDA03C-8 SMDA05C-8 SMDA12C-8 SMDA15C-8 SMDA24C-8 SDL8 SDB8 SDD8...