16-bit microcontroller. P90CL301BFH Datasheet

P90CL301BFH microcontroller. Datasheet pdf. Equivalent

P90CL301BFH Datasheet
Recommendation P90CL301BFH Datasheet
Part P90CL301BFH
Description Low voltage 16-bit microcontroller
Feature P90CL301BFH; INTEGRATED CIRCUITS DATA SHEET P90CL301BFH (C100) Low voltage 16-bit microcontroller Preliminary s.
Manufacture NXP
Datasheet
Download P90CL301BFH Datasheet




NXP P90CL301BFH
INTEGRATED CIRCUITS
DATA SHEET
P90CL301BFH (C100)
Low voltage 16-bit microcontroller
Preliminary specification
File under Integrated Circuits, IC17
1996 Dec 11



NXP P90CL301BFH
Philips Semiconductors
Low voltage 16-bit microcontroller
Preliminary specification
P90CL301BFH (C100)
CONTENTS
1
2
2.1
3
4
5
5.1
5.2
6
6.1
6.2
6.3
6.4
6.5
6.6
6.7
6.8
7
7.1
7.2
7.3
7.4
7.5
7.6
7.7
8
8.1
8.2
8.3
9
10
10.1
11
11.1
11.2
11.3
11.4
11.5
11.6
11.7
FEATURES
DESCRIPTION
Compatibility between P90CL301AFH and
P90CL301BFH
ORDERING INFORMATION
BLOCK DIAGRAM
PINNING INFORMATION
Pinning
Pin description
SYSTEM CONTROL
Memory organization
Programmable chip-select
Dynamic bus port sizing
System Control Register (SYSCON)
Reset operation
Clock generation
Interrupt controller
Power reduction modes
CPU FUNCTIONAL DESCRIPTION
General
Programming model and data organization
Processing states and exception processing
Tracing
Stack format
CPU interrupt processing
Bus arbitration
PORTS
Port P Control Register (PCON)
Port SP
Ports schematics
8051 PERIPHERAL BUS
ON-CHIP PERIPHERAL FUNCTIONS
Peripheral interrupt control
TIMERS
Timer array
Timebase
Channel function
Pin parallel functions for the timer
Timer Control Registers
Timer Status Register
Watchdog Timer
12
12.1
12.2
12.3
12.4
12.5
13
13.1
13.2
14
14.1
15
15.1
15.2
16
17
18
19
20
21
22
23
24
25
26
26.1
27
28
29
29.1
29.2
29.3
29.4
30
31
32
SERIAL INTERFACES
UART interface
Baud rate generator
UART queue
I2C-bus interface
Serial Control Register (SCON)
PULSE WIDTH MODULATION OUTPUTS
(PWM)
Prescaler PWM Register (PWMP)
PWM Data Registers (PWM0 and PWM1)
ANALOG-TO-DIGITAL CONVERTER (ADC)
ADC Control Register (ADCON)
ON-BOARD TEST CONCEPT
ONCE mode
Test ROM
ON-CHIP RAM
REGISTER MAPPING
LIMITING VALUES
DC CHARACTERISTICS
ADC CHARACTERISTICS
AC CHARACTERISTICS
8051 BUS TIMING
TIMING DIAGRAMS
CLOCK TIMING
PIN STATES IN VARIOUS MODES
INSTRUCTION SET AND ADDRESSING
MODES
Addressing modes
INSTRUCTION TIMING
PACKAGE OUTLINE
SOLDERING
Introduction
Reflow soldering
Wave soldering
Repairing soldered joints
DEFINITIONS
LIFE SUPPORT APPLICATIONS
PURCHASE OF PHILIPS I2C COMPONENTS
1996 Dec 11
2



NXP P90CL301BFH
Philips Semiconductors
Low voltage 16-bit microcontroller
Preliminary specification
P90CL301BFH (C100)
1 FEATURES
Fully 68000 software compatible
Static design with 32-bit internal structure
Power saving modes: Power-down, Standby and Idle
mode
External clock input: 27 MHz at 2.7 V
Single supply voltage of 2.7 to 3.6 V; down to 1.8 V for
RAM retention
68000 compatible bus interface
Intel 8051 compatible bus interface
16 Mbytes program/data address range
8 programmable chip-selects
Dynamic bus sizing, 16 or 8-bit memory bus port size
56 powerful instruction types:
– 5 basic data types, and
– 14 addressing modes
7 programmable interrupt inputs:
– a Non-Maskable Interrupt input (NMIN)
– 14 auto-vectored interrupts and 7 interrupt priority
levels
24 port pins (multiplexed with other functions)
2 UART serial interfaces; an independent baud rate
generator with two programmable outputs (UART0 and
UART1)
UART queue with maximum 256 bytes
I2C-bus serial interface 100 kbaud
2 timer arrays including:
– two 16-bit reference counters and 8-bit
programmable prescalers
– six 16-bit match/capture registers with equality
comparators
Watchdog Timer with 21-bit resolution
Two 8-bit Pulse Width Modulation (PWM) outputs with
8-bit prescaler
Four 8-bit Analog-to-Digital Converter (ADC) inputs with
Power-down mode
512 bytes RAM on-chip
On-Circuit Emulation (ONCE) mode and internal
Test-ROM (256 bytes) for on-board testing
80-pin LQFP package
Temperature range 40 to +85 °C
0.5 micron CMOS low voltage technology.
2 DESCRIPTION
The P90CL301BFH is a highly integrated low-voltage
16/32-bit microcontroller especially suitable for digital
mobile systems such as GSM, DCS1900, IS54/95 and
other applications requiring low voltage, low power
consumption and high computing power. It is fully software
compatible with the 68000.
The P90CL301BFH optimizes system cost by providing
both standard as well as advanced peripheral functions
on-chip. The P90CL301BFH has a full static design and
special Idle, Standby and Power-down modes which allow
further reduction of the total system power consumption.
An 80-pin LQFP package dramatically reduces system
size requirements.
2.1 Compatibility between P90CL301AFH and
P90CL301BFH
For functional compatibility between P90CL301AFH
(SAC1 process) and P90CL301BFH (C100 process), the
following points should be considered when using the
P90CL301BFH:
Wake-up; to wake-up the processor from Power-down
mode via the activation of an external SPn pin, it is
necessary to enable the interrupt mode first by setting
the corresponding bit in the SPCON register.
SYSCON register; for the P90CL301AFH bits 11 to 15
in the SYSCON register should not be set in order to
keep additional functionality in the P90CL301BFH
inactive.
3 ORDERING INFORMATION
TYPE NUMBER
P90CL301BFH
NAME
LQFP80
PACKAGE
DESCRIPTION
plastic low profile quad flat package; 80 leads;
body 12 × 12 × 1.4 mm
VERSION
SOT315-1
TEMPERATURE
RANGE (°C)
40 to +85
1996 Dec 11
3







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)