DatasheetsPDF.com

PAA140 Dataheets PDF



Part Number PAA140
Manufacturers Clare Inc.
Logo Clare  Inc.
Description Single Pole OptoMOS Relays
Datasheet PAA140 DatasheetPAA140 Datasheet (PDF)

PAA140 Single Pole OptoMOS® Relays Load Voltage Load Current Max RON PAA140 400 250 8 Units V mA Ω Description PAA140 is a 400V, 250mA, 8Ω 2-Form-A relay. This performance leader provides a high peak load voltage handling capability combined with a very low resistance for specialized applications. Features • Small 8 Pin DIP Package • Low Drive Power Requirements (TTL/CMOS Compatible) • No Moving Parts • High Reliability • Arc-Free With No Snubbing Circuits • 3750VRMS Input/Output Isolation .

  PAA140   PAA140


Document
PAA140 Single Pole OptoMOS® Relays Load Voltage Load Current Max RON PAA140 400 250 8 Units V mA Ω Description PAA140 is a 400V, 250mA, 8Ω 2-Form-A relay. This performance leader provides a high peak load voltage handling capability combined with a very low resistance for specialized applications. Features • Small 8 Pin DIP Package • Low Drive Power Requirements (TTL/CMOS Compatible) • No Moving Parts • High Reliability • Arc-Free With No Snubbing Circuits • 3750VRMS Input/Output Isolation • No EMI/RFI Generation • Machine Insertable, Wave Solderable • Surface Mount and Tape & Reel Versions Available Approvals These products comply with the requirements of: • • • • • UL 1577 (UL recognized file #E76270) CSA #14 (CSA certified file #LR43639) EN 60950 IEC 950 AS/NZS 3260 Ordering Information Applications • Telecommunications • Telecom Switching • Tip/Ring Circuits • Modem Switching (Laptop, Notebook, Pocket Size) • Hookswitch • Dial Pulsing • Ground Start • Ringer Injection • Instrumentation • Multiplexers • Data Acquisition • Electronic Switching • I/O Subsystems • Meters (Watt-Hour, Water, Gas) • Medical Equipment-Patient/Equipment Isolation • Security • Aerospace • Industrial Controls Part # PAA140 PAA140P PAA140PTR PAA140S PAA140STR Description 8 Pin DIP (50/Tube) 8 Pin Flatpack (50/Tube) 8 Pin Flatpack (1000/Reel) 8 Pin Surface Mount (50/Tube) 8 Pin Surface Mount (1000/Reel) Pin Configuration PAA140 Pinout AC/DC Configuration + Control - Switch #1 – Control - Switch #1 + Control - Switch #2 – Control - Switch #2 1 2 3 4 8 7 6 5 Load - Switch #1 Load - Switch #1 Load - Switch #2 Load - Switch #2 Switching Characteristics of Normally Open (Form A) Devices 10ms CONTROL LOAD 10%+ +90% 10%+ TON TOFF DS-PAA140-R5 www.clare.com 1 PAA140 Absolute Maximum Ratings (@ 25˚ C) Parameter Input Power Dissipation Input Control Current Peak (10ms) Reverse Input Voltage Total Power Dissipation Isolation Voltage Input to Output Operational Temperature Storage Temperature Soldering Temperature DIP Package Flatpack/Surface Mount Package (10 Seconds Max.) 1 2 Min 3750 -40 -40 - Typ Max Units 1501 50 1 5 8002 mW mA A V mW Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for an extended period may degrade the device and effect its reliability. VRMS °C +85 +125 °C +260 +220 °C °C Derate Linearly 1.33 mw/˚C Derate Linearly 6.67 mw/˚C Electrical Characteristics Parameter Output Characteristics @ 25°C Load Voltage (Peak) Load Current* (Continuous) AC/DC Configuration Peak Load Current On-Resistance AC/DC Configuration Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Capacitance Input to Output Input Characteristics @ 25°C Input Control Current Input Dropout Current Input Voltage Drop Reverse Input Voltage Reverse Input Current Input to Output Capacitance Input to Output Isolation Conditions 10ms IL=250mA VL=400V IF=5mA, VL=10V IF=5mA, VL=10V 50V; f=1MHz IL= 250mA IF= 5mA VR=5V Symbol VL IL ILPK RON ILEAK TON TOFF COUT IF IF VF VR IR CI/O VI/O Min 5 0.4 0.9 3750 Typ 6 65 3 0.7 1.2 3 MaX 400 250 500 8 1 3.0 1.0 50 1.4 5 10 Units V mA mA Ω µA ms ms pF pF mA mA V V µA pF VRMS *NOTE: If both poles operate simultaneously load current must be derated so as not to exceed the package power dissipation value. 2 www.clare.com Rev. 5 PAA140 PERFORMANCE DATA* PAA140 Typical LED Forward Voltage Drop (N=50 Ambient Temperature = 25°C; IF = 5mADC) 35 30 Device Count (N) 25 20 15 10 5 0 1.17 1.19 1.21 1.23 1.25 LED Forward Voltage Drop (V) Device Count (N) 35 30 PAA140 Typical On-Resistance Distribution (N=50 Ambient Temperature = 25°C) (Load Current = 250mADC, IF = 5mADC) 35 30 Device Count (N) 25 20 15 10 5 0 PAA140 Typical Blocking Voltage Distribution (N=50 Ambient Temperature = 25°C) 25 20 15 10 5 0 5.03 5.38 5.73 6.08 6.43 6.78 7.13 On-Resistance (Ω) 430 442 454 466 478 490 502 Blocking Voltage (V) PAA140 Typical IF for Switch Operation (N=50 Ambient Temperature = 25°C) (Load Current = 250mADC) 25 20 15 10 5 0 1.5 2.1 2.7 3.3 3.9 4.5 5.1 LED Current (mA) 25 20 15 10 5 0 PAA140 Typical IF for Switch Dropout (N=50 Ambient Temperature = 25°C) (Load Current = 250mADC) 25 20 15 10 5 0 0.9 1.5 2.1 2.7 3.3 3.9 4.5 PAA140 Typical Turn-On Time (N=50 Ambient Temperature = 25°C) (Load Current = 250mADC; IF = 5mADC) Device Count (N) Device Count (N) Device Count (N) 0.39 0.65 0.91 1.17 1.43 1.69 1.95 LED Current (mA) Turn-On (ms) 25 20 15 10 5 0 PAA140 Typical Turn-Off Time (N=50 Ambient Temperature = 25°C) (Load Current = 250mADC; IF = 5mADC) PAA140 Typical Load Current vs. Temperature 350 Load Current (mA) 300 Leakage (µA) 250 200 150 100 0.12 0.10 0.08 0.06 0.04 0.02 -40 -20 0 20 40 60 8.


PAA110L PAA140 PAA150


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)