Document
Features
• Glass Passivated Die Construction • Fast Recovery Time For High Efficiency • Surge Overload Rating to 50A Peak • Ideally Suited for Automated Assembly • Lead Free Finish/RoHS Compliant (Note 1) • Green Molding Compound (No Halogen and Antimony)
(Note 2)
RS2A/A - RS2M/A
1.5A SURFACE MOUNT FAST RECOVERY RECTIFIER
Mechanical Data
• Case: SMA/SMB • Case Material: Molded Plastic. UL Flammability Classification
Rating 94V-0 • Moisture Sensitivity: Level 1 per J-STD-020 • Terminals: Lead Free Plating (Matte Tin Finish). Solderable per
MIL-STD-202, Method 208 • Polarity: Cathode Band or Cathode Notch • SMA Weight: 0.065 grams (approximate) • SMB Weight: 0.09 grams (approximate)
Top View
Bottom View
Ordering Information (Note 3)
Part Number RS2xA-13-F RS2x-13-F
Case SMA SMB
Packaging 5000/Tape & Reel 3000/Tape & Reel
*x = Device type, e.g. RS2DA-13-F (SMA package); RS2J-13-F (SMB package).
Notes:
1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied, see EU Directive 2002/95/EC Annex Notes. 2. Product manufactured with Data Code 0924 (week 24, 2009) and newer are built with Green Molding Compound. 3. For packaging details, go to our website at http://www.diodes.com.
Marking Information
YWW RS2x(A)
RS2x = Product type marking code, ex: RS2G (SMB package) RS2xA = Product type marking code, ex: RS2GA (SMA package)
= Manufacturers’ code marking YWW = Date code marking Y = Last digit of year (ex: 2 for 2002) WW = Week code (01 to 53)
RS2A/A - RS2M/A
Document number: DS15004 Rev. 11 - 2
1 of 4 www.diodes.com
September 2010
© Diodes Incorporated
RS2A/A - RS2M/A
Maximum Ratings @TA = 25°C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load, derate current by 20%.
Characteristic
Symbol
Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage (Note 4)
RMS Reverse Voltage
Average Rectified Output Current
@ TT = 120°C
Non-Repetitive Peak Forward Surge Current
8.3ms Single Half Sine-Wave Superimposed on Rated Load
VRRM VRWM
VR VR(RMS)
IO
IFSM
RS2 A/AA
50
35
RS2 B/BA
100
70
RS2 RS2 D/DA G/GA
200 400
140 280 1.5 50
RS2 J/JA
600
420
RS2 RS2 K/KA M/MA
800 1000
560 700
Unit
V
V A A
Thermal Characteristics
Characteristic Typical Thermal Resistance, Junction to Terminal (Note 5) Operating and Storage Temperature Range
Symbol
RθJT TJ, TSTG
Value 20
-65 to +150
Unit °C/W
°C
Electrical Characteristics @TA = 25°C unless otherwise specified
Characteristic
Forward Voltage Peak Reverse Current at Rated DC Blocking Voltage (Note 4) Reverse Recovery Time (Note 6) Typical Total Capacitance (Note 7)
Symbol
@ IF = 1.5A @ TA = 25°C @ TA = 125°C
VFM
IRM
trr CT
RS2 A/AA
RS2 RS2 B/BA D/DA
150
RS2 G/GA
1.3 5.0 200
30
RS2 J/JA
250
RS2 RS2 K/KA M/MA
500
Notes:
4. Short duration pulse test used to minimize self-heating effect. 5. Reverse recovery test conditions: IF = 0.5A, IR = 1.0A, Irr = 0.25A. See Figure 5. 6. Thermal Resistance: Junction to terminal, unit mounted on PC board with 5.0 mm2 (0.013 mm thick) copper pads as heat sink. 7. Measured at 1.0MHz and applied reverse voltage of 4.0V DC.
Unit V
μA ns pF
1.5 10
1.0 1.0
IO, AVERAGE RECTIFIED CURRENT (A) IF, INSTANTANEOUS FORWARD CURRENT (A)
0.5
0 25 50 75 100 125 150 175 TT, TERMINAL TEMPERATURE (°C) Fig. 1 Forward Current Derating Curve
0.1
TJ = 25°C
0.01 0
0.4 0.8 1.2 1.6
VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics
RS2A/A - RS2M/A
Document number: DS15004 Rev. 11 - 2
2 of 4 www.diodes.com
September 2010
© Diodes Incorporated
IFSM, PEAK FORWARD SURGE CURRENT (A) IR, INSTANTANEOUS REVERSE CURRENT (µA)
60
Single Half-Sine-Wave
50
TJ = 150°C
40
30
20
10
0 1 10 100 NUMBER OF CYCLES AT 60 Hz Fig. 3 Forward Surge Current Derating Curve
1,000 100
RS2A/A - RS2M/A
TJ = 125°C
10
1.0 TJ = 25°C
0.1 0
20 40 60 80 100 120 140
PERCENT OF RATED PEAK REVERSE VOLTAGE (%)
Fig. 4 Typical Reverse Characteristics
Package Outline Dimensions
B AC
J H
G E
D
RS2A/A - RS2M/A
Document number: DS15004 Rev. 11 - 2
SMA Dim Min Max
A 2.29 2.92 B 4.00 4.60 C 1.27 1.63 D 0.15 0.31 E 4.80 5.59 G 0.05 0.20 H 0.76 1.52 J 2.01 2.30 All Dimensions in mm
SMB Dim Min Max
A 3.30 3.94 B 4.06 4.57 C 1.96 2.21 D 0.15 0.31 E 5.00 5.59 G 0.05 0.20 H 0.76 1.52 J 2.00 2.50 All Dimensions in mm
3 of 4 www.diodes.com
September 2010
© Diodes Incorporated
Suggested Pad Layout
RS2A/A - RS2M/A
SMA Dimensions
Z G X Y C
Value (in mm)
6.5 1.5 1.7 2.5 4.0
SMB Dimensions
Z G X Y C
Value (in mm)
6.7 1.8 2.3 2.5 4.3
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other ch.