RN5RK SERIES
VFM STEP-UP DC/DC CONVERTER
NO.EA-045-111124
OUTLINE
The RN5RKxx1A/xx1B/xx2A Series are CMOS-based VFM (...
RN5RK SERIES
VFM STEP-UP DC/DC CONVERTER
NO.EA-045-111124
OUTLINE
The RN5RKxx1A/xx1B/xx2A Series are CMOS-based VFM (Chopper) Step-up DC/DC converter ICs with ultra low supply current and high output voltage accuracy.
Each of the RN5RKxx1A/xx1B consists of an oscillator, a VFM control circuit, a driver
transistor to have low ON resistance (Lx switch), a reference voltage unit, a high speed comparator, resistors for voltage detection, an Lx switch protection circuit and an internal chip enable circuit. A low ripple, high efficiency step-up DC/DC converter can be composed of this RN5RKxx1A/xx1B with only three external components: an inductor, a diode and a capacitor.
The RN5RKxx2A uses the same chip as what is employed in the RN5RKxx1A/1B IC and has a drive pin (EXT) for an external
transistor instead of an Lx pin. As it is possible to load a large output current with a power
transistor which has a low saturation voltage, RN5RKxx2A IC is recommendable to users who need an output current as large as between several tens mA and several hundreds mA.
Using the chip enable function, it is possible to make the supply current on standby minimized. Since the package for these ICs is SOT-23-5, high density mounting of the ICs on board is possible.
FEATURES
Small Number of External Components .............................. Only an inductor, a diode and a capacitor (RN5RKxx1A/xx1B)
Standby Current ................................................................... Typ. 0μA Low ...