PROGRAMMABLE ATTENUATOR
RF2420
9
Typical Applications
• Power Control in Communication Systems • CMOS Compatible Programmable Attenuators • Comm...
Description
RF2420
9
Typical Applications
Power Control in Communication Systems CMOS Compatible Programmable Attenuators Commercial and Consumer Systems Portable Battery-Powered Equipment
PROGRAMMABLE ATTENUATOR
Product Description
The RF2420 is a multistage monolithic programmable attenuator. The device is built using an advanced Gallium Arsenide process technology and has an attenuation programmability over a 44dB range in 2dB steps. The attenuation is set by five bits of digital data. The input and output of the device have a low VSWR 50 Ω match. This unit is intended for use in systems that require RF transmit power control by digital means. Typical applications are in dual mode IS-54/55 compatible cellular transceivers and TETRA systems. No negative supply voltages are required.
0.157 0.150
-A0.008 0.004
0.393 0.386
0.018 0.014 0.050
0.244 0.229 8° MAX 0° MIN 0.009 0.007
0.068 0.053
NOTES: 1. Shaded lead is Pin 1. 2. All dimensions are excluding mold flash. 3. Lead coplanarity - 0.005 with respect to datum "A".
Optimum Technology Matching® Applied
Si BJT Si Bi-CMOS GaAs HBT SiGe HBT
ü
Package Style: SOIC-16
GaAs MESFET Si CMOS
Features
Single 3V to 6V Supply 0dB to 44dB Attenuation Range 4dB Insertion Loss 5-bit Digitally Controlled Attenuation Digitally Controlled Power Down Mode DC to 950MHz Frequency Range
RF IN 1 2 dB VDD 2 VDD 3 VDD 4 8 dB VDD 5 VDD 6 VDD 7 20 dB VDD 8 10 dB 4 dB
16 G2 15 G4 14 G8 13 GND 12 GND 11 G10 10 G20 9 RF OUT
Ordering ...
Similar Datasheet