CDMA LOW NOISE AMPLIFIER/MIXER 900MHz DOWNCONVERTER
RF2861CDMA Low Noise Amplifier/Mixer 900MHz Downconverter
RF2861
CDMA LOW NOISE AMPLIFIER/MIXER
900MHz DOWNCONVERTER
...
Description
RF2861CDMA Low Noise Amplifier/Mixer 900MHz Downconverter
RF2861
CDMA LOW NOISE AMPLIFIER/MIXER
900MHz DOWNCONVERTER
Package Style: QFN, 16-pin, 3mm x 3mm
ENABLE TX BUFF ENABLE LO OUT VCC
Features
3mm x 3mm LNA/Mixer Solution
Adjustable LNA and Mixer Current/IIP3
Meets IMD Tests with Three Gain States/Two Logic Control Pins
Integrated TX LO Buffer Amplifier
Full ESD Protection on all Pins
Applications
CDMA/JCDMA Cellular Systems
CDMA450 Handsets/Data Cards
AMPS Cellular Systems General Purpose LNA and
Downconverter Commercial and Consumer
Systems Portable Battery-Powered
Equipment
16 15 14 13
G2 1
12 LO IN
LNA IN 2
11 GND
LNA EMITTER 3
10 IF OUT-
LNA OUT 4
9 IF OUT+
5678
ISET2 ISET1
G1 MIX IN
Functional Block Diagram
Product Description
The RF2861 is a receiver front-end for CDMA cellular applications, including JCDMA and CDMA450. It is designed to amplify and downconvert RF signals, using a three gain state LNA to obtain 17dB of stepped gain control. Features include digital control of LNA gain and power down mode, along with an integrated TX LO buffer amplifier. Another feature of the chip is adjustable IIP3 of the LNA and mixer using off-chip current setting resistors to allow for minimum DC current consumption. Noise figure, IIP3, and other specs are designed to be compatible with the TIA/EIA 98D standard for CDMA cellular communications. The IC is manufactured on an advanced Silicon Germanium Bi-CMOS process and is in a 3mm x 3mm, ...
Similar Datasheet