2.42.5 GHz Power Amplifier
Preliminary RFSP2010
2.4–2.5 GHz Power Amplifier
Applications
• 802.11b/g WLAN • 2.4 GHz ISM band wireless equipment
P...
Description
Preliminary RFSP2010
2.4–2.5 GHz Power Amplifier
Applications
802.11b/g WLAN 2.4 GHz ISM band wireless equipment
Product Description
The RFSP2010 power amplifier is a highperformance GaAs HBT IC designed for use in transmit applications in the 2.4-2.5 GHz frequency band. With a P1dB of 25 dBm, the device is ideal as a final stage for wireless LAN applications requiring high transmit linearity. Designed with propriety linearizing techniques, the part is operable closer to P-1dB, which enables the device to achieve a specific error vector magnitude (EVM) with less backoff. The PA exhibits unparalleled linearity and efficiency for both 802.11b- and 802.11g-based WLAN systems. The part operates off a single +3.3V supply.
12
VBCC1
VBCC2
11
VCC1
10
NC
1
Bias
Bias
9
VCC2
RF IN
2
Input Match
Output Match
8
RF OUT
Product Features
GND 3 7 GND
4
NC
3.00
5
VPC
6
NC
1.00 0.80 4 0.45 0.35
Functional Block Diagram
25 dBm P1dB@3.3V 21.5 dB gain 1.5 % EVM @ POUT = +18 dBm with 54 Mbps OFDM signal 95 mA @ POUT = +18 dBm with 54 Mbps OFDM signal Single +3.3V supply voltage PA power on/off logic Input and output matched to 50 ohms
0.275 0.225
Pin 1
Index Area
12
1. All dimensions are in millimeters, angles in degrees. 2. The terminal #1 identifier and pad numbering convention shall conform to JESD 95-1 SPP-012 3. Lead coplanarity: 0.05 max. 4. Dimension applies to metalized pad and is measured between 0.25 and 0.30 MM from pad tip.
1
0.50 TYP 3....
Similar Datasheet