|
|
SINGLE STONE. PBA31307 Datasheet |
|
|
|
Product Brief
SingleStone
PBA 31307
The BluetoothR module SingleStone
offers a qualified ready-to-use solution for accelerated time-to-market.
It is based on Infineon's successful BlueMoonR Single Cellular IC,
a single-chip Bluetooth solution.
The high level of integration of the BlueMoon Single Cellular IC resulted
into a competitive module footprint providing an optimized pad layout
for easy design-in. The SingleStone module is qualified for a
temperature range from -40 to +85 °C enabling a wide spectrum of
applications in a variety of different environments. Additionally,
SingleStone is Bluetooth 1.2 compliant and supports features such as
Adaptive Frequency Hopping, Enhanced SCO and Fast Connection Setup.
Thus the SingleStone module is the perfect match for today's and
future requirements of a standard Bluetooth HCI application.
Key Features
■ Supporting all released Bluetooth 1.1 profiles
■ Bluetooth 1.2 support
– Adaptive frequency hopping
– Extended SCO
– Fast connection setup
■ Programmable power-down modes
■ On-module Bluetooth reference clock oscillator
■ On-module E²PROM for Bluetooth device data
■ Full automatic tuning and trimming (no manual or SW tuning)
■ High RF sensitivity (-85 dBm @ 0.1% BER)
■ On-chip 2.4 GHz RF driver amplifier with max. +7dBm output power
■ Automatic control of output power for reduced power consumption
Key Benefits
■ Bluetooth qualified module component
■ Reduced time-to-market
■ Easy production handling
■ Reduced cost of ownership
Applications
■ Consumer, Automotive &
Industrial Applications
■ Hands-free gateway
■ Dial-up networking
■ Data transfer & synchronization
■ Advanced Audio
Note: The Bluetooth word mark is owned by the Bluetooth SIG, Inc.
and any use of this mark by Infineon Technologies AG
is under license. The BlueMoon trade mark is owned by
Infineon Technologies AG.
www.infineon.com/bluetooth
Wireless Communication
Never stop thinking.
|
Product Brief
BlueMoon
Single Cellular
Link Manager
Baseband
PMB 8761
PCM
PCM
Power
Mgmt
HCI UART
TX
ROM
Firmware
RAM
Link
Controller
BT 1.2
Core
RX
Voltage
Regulator
3.0 ... 3.6 V
EEPROM
26 MHz
TCXO
32.768 kHz
Radio
Output
Power
Control
TX
Balun
Filter
RX
Block Diagram
■ HCI-UART (2, 4 wired)
■ PCM (A-law, µ-law)
■ Wake up line
■ On-module E2PROM for
Bluetooth device data
■ On-module 26 MHz
reference clock
■ On-module balun/filter
■ On-module voltage regulator
Product Summary
Product
Sales Code
SingleStone
PBA 31307
Package
Module 11.86 x 10.6 mm²,
72 pads at 1.27 mm pitch
Home Infotainment
Bringing mobile connectivity to your home. Due to its standardized HCI-UART interface, SingleStone is the perfect module
for easy integration into all kinds of consumer electronic devices. Having all RF components integrated and being
Bluetooth 1.2 pre-qualified, it allows shortest time-to-market at unbeatable value for money.
Similarly, all these applications can be realized in the automotive and industrial environment (e.g. car infotainment),
as SingleStone meets segments’ extended quality requirements.
Application Example
How to reach us:
http://www.infineon.com
Published by
Infineon Technologies AG,
St.-Martin-Strasse 53,
D-81669 München
© Infineon Technologies AG 2004.
All Rights Reserved.
Template: pb_tmplt.fm/4
Attention please!
The information herein is given to describe certain components
and shall not be considered as a guarantee of characteristics.
Terms of delivery and rights to technical change reserved.
We hereby disclaim any and all warranties, including but not
limited to warranties of non-infringement, regarding circuits,
descriptions and charts stated herein.
Information
For further information on technology, delivery terms
and conditions and prices please contact your nearest
Infineon Technologies Office.
Warnings
Due to technical requirements components may contain dangerous
substances. For information on the types in question please contact
your nearest Infineon Technologies Office.
Infineon Technologies Components may only be used in life-
support devices or systems with the express written approval of
Infineon Technologies, if a failure of such components can reason-
ably be expected to cause the failure of that life-support device or
system, or to affect the safety or effectiveness of that device or sys-
tem. Life support devices or systems are intended to be implanted
in the human body, or to support and/or maintain and sustain
and/or protect human life. If they fail, it is reasonable to assume
that the health of the user or other persons may be endangered.
Published by Infineon Technologies AG
Ordering No. B134-H8256-G1-X-7600
Printed in Germany
PS 04041. NB
|
| @ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact) |