Maintenance and control device
INTEGRATED CIRCUITS
PTN3500 Maintenance and control device
Product specification Supersedes data of 2000 Nov 22 2001 Ja...
Description
INTEGRATED CIRCUITS
PTN3500 Maintenance and control device
Product specification Supersedes data of 2000 Nov 22 2001 Jan 17
Philips Semiconductors
Philips Semiconductors
Product specification
Maintenance and control device
PTN3500
FEATURES
I2C to parallel port expander Internal 256x8 E2PROM Self timed write cycle (5 ms typ.) Four byte page write operation Controlled pull-up on address lines Low voltage VCC range of +2.5 V to +3.6 V 5 V – tolerant I/Os Low standby current (< 60 µA ) Power on Reset Supports Live Insertion Compatible with SMBus specification version 1.1 High E2PROM endurance and data retention Available in SO16 and TSSOP16 package options
DESCRIPTION
The PTN3500 is a general purpose maintenance and control device. It features an on-board E2PROM that can be used to store error codes or board manufacturing data for read–back by application software for diagnostic purposes. The eight quasi bidirectional data pins can be independently assigned as inputs or outputs to monitor board level status or activate indicator devices such as LEDs. The PTN3500 has three address pins allowing up to 8 devices to share the common two wire I2C software protocol serial data bus. The PTN3500 supports live insertion to facilitate usage in removable cards on backplane systems.
PIN CONFIGURATION
A0
1
16
VDD
A1 A2
2
15
SDA SCL
3 4 PTN3500
14 13
P0 P1 P2
WC P7 P6
5
12
6
11 10
P3 VSS
7 8
P5 P4
9
SW00541
Figure 1.
PIN DESCRIPTION
PIN...
Similar Datasheet