IGBT Photovoltaic Relay
Data Sheet No. PD 10046B
Series PVX6012
Microelectronic Power IC Relay
IGBT Photovoltaic Relay
Single Pole, Normally O...
Description
Data Sheet No. PD 10046B
Series PVX6012
Microelectronic Power IC Relay
IGBT Photovoltaic Relay
Single Pole, Normally Open, 0-280VAC (RMS) or 0-400VDC, 1.0A AC/DC
General Description
The PVX6012 Photovoltaic Relay is a single-pole, normally open solid-state relay that can replace electromechanical relays in many applications. It utilizes an IGBT output switch, driven by an integrated circuit photovoltaic generator of novel construction. The output switch is controlled by radiation from a GaAlAs light emitting diode (LED) which is optically isolated from the photovoltaic generator. The PVX6012 is ideally suited for switching medium power loads. It offers high operating speed, low and stable on-state voltage drop as well as low off-state leakage current. PVX6012 relays are packaged in a 14-pin, molded DIP package in thru-hole. It is available in standard plastic shipping tubes.
Features
§ § § § § § § IGBT and HEXFRED output Bounce-free operation 3,750 VRMS I/O isolation High load current capacity Low off-state leakage current Solid-State reliability UL recognized and CSA certified
Applications
§ § § § Test Equipment Industrial Controls and Automation Electromechanical Relay Replacement Mercury-wetted Relay Replacement
Part Identification
PVX6012 through-hole
PVX6012
Electrical Specifications (-40°C ≤ TA ≤ +85°C unless otherwise specified) INPUT CHARACTERISTICS
Minimum Control Current (see figure 1) Maximum Control Current for Off-State Leakage @TA =+25°C Control Curre...
Similar Datasheet