PC911

PC911 PC911 s Features 1. Ultra-high speed response ( t PHL , t PLH : TYP. 50ns ) 2. High instantaneous common mode rejection voltage ( CM H : TYP. 10kV/ µ s ) 3. High isolation voltage ( Viso : 4 000V rms ) 4. Recognized by UL, file No. E64380 Ultra-high Speed Response and High CMR OPIC Photocoupler s Outline Dimensions 0.85 ± 0.3 8 7 6 PC911 1.2 ± 0.3 5 6.5 ± 0.5 g Lead forming type ( I type ) and taping reel type ( P type ) are also available. ( PC911I/PC911P ) ( Unit : mm ) Internal connection diagram 8 7 6 5 Amp 1 2 3 4 0.8 ± 0.2 Primary side mark ( Sunken place ) 1 2 3 4 s Applications 1. High speed interfaces for computer peripherals and microcomputer systems 2. High speed line receivers 3. Interfaces with various data transmission equipment 3.7 ± 0.5 3.5 ± 0.5 0.5TYP. 9.22 ± 0.5 7.62 ± 0.3 0.5 ± 0.1 2.54 ± 0.25 θ θ = 0 ˚ to 13 ˚ 0.26 ± 0.1 θ 1 2 3 4 NC Anode Cathode NC 5 6 7 8 GND VO VE V CC * “ OPIC ” ( Optical IC ) is a trademark of the SHARP Corporation. An OPIC consists of a light-detecting element and signalprocessing circuit integrated onto a single chip. s Absolute Maximum Ratings Parameter *1 Forward current Reverse voltage *1 Power dissipation Supply voltage *2 Enable voltage High level output current Low level output current *1 *3Power dissipation *4 Isolation voltage Operating temperature Storage temperature *5 Soldering temperature Symbol IF VR P V CC VE V OH I OL P V iso T opr T stg T sol ( Ta = 25˚C ) Rating 20 5 40 7 7 - 8 25 40...