Silicon Bipolar MMIC 3.5 and 5.5 GHz Divide-by-4 Static Prescalers
Silicon Bipolar MMIC 3.5 and 5.5 GHz Divide-by-4 Static Prescalers Technical Data
IFD-53010 IFD-53110
Features
• Wide O...
Description
Silicon Bipolar MMIC 3.5 and 5.5 GHz Divide-by-4 Static Prescalers Technical Data
IFD-53010 IFD-53110
Features
Wide Operating Frequency Range: IFD-53010: 0.15 to 5.5 GHz IFD-53110: 0.15 to 3.5 GHz Low Phase Noise: -143 dBc/Hz @ 1 kHz Offset Output Power: -5 dBm Typ. Single Supply Voltage Vcc = 5 V or Vee = -5 V On-Chip Terminations Provide Good Input and Output VSWRs Hermetic Gold-Ceramic Surface Mount Package
100 mil Stripline Package
Description
Hewlett-Packard's IFD-53010 and IFD-53110 are low phase noise silicon bipolar static digital frequency dividers using two scaled Emitter-Coupled-Logic (ECL) master-slave D flip-flops and buffer amplifiers. They are housed in hermetic high reliability surface mount packages suitable for commercial, industrial, and military applications. Typical applications include stabilized or digitally controlled local oscillators for GPS, SATCOM or military receivers, and frequency synthesizers and counters in instrumentation systems. The IFD-53110 is a lower cost selected version of the IFD-53010, and is distinguished by a reduced operating frequency range. The IFD series of frequency dividers is fabricated using Hewlett-Packard's 18 GHz, ft, ISOSATâ„¢-2 silicon bipolar process which uses nitride selfalignment, submicrometer lithography, trench isolation, ionimplantation, gold metallization and polyimide intermetal dielectric and scratch protection to achieve excellent device uniformity, performance, and reliability.
Pin Configurat...
Similar Datasheet