8-pin DIP-Type SSR
S13MD01
S13MD01
s Features
1. Compact 8-pin dual-in-line package 2. RMS ON-state current (IT : 0.3Arms) 3. Repetitive p...
Description
S13MD01
S13MD01
s Features
1. Compact 8-pin dual-in-line package 2. RMS ON-state current (IT : 0.3Arms) 3. Repetitive peak OFF-state voltage is high. 4. Isolation voltage between input and output (Viso : 4000Vrms) 5. Recognized by UL (No. E94758) 6. Approved by CAS (No. LR63705)
8-pin DIP Type SSR for Low Power Control
s Outline Dimensions
Internal connection diagram 8 6 5 1 2 3 4 5 6 8
(Unit : mm)
1
2
3
4
Cathode Anode Cathode Cathode G T1 T2
2.54 ± 0.25
s Application
1. Oil fan heaters 2. Microwave ovens 3. Refrigerators
Anode mark
8
6
5 6.5 ± 0.5 4 1.2 ± 0.3 7.62 ± 0.3 0.5 TYP. 3.5 ± 0.5
S13MD01
1
2
3
9.66 ± 0.5
3.1 ± 0.5
3.4 ± 0.5
0.5 ± 0.1
0.26 ± 0.1 θ : 0 to 13˚ θ
* (Note) Terminals 1 , 3 and 4 are common ones of cathode. To radiate the heat, solder all of the lead pins on the pattern of PWB.
s Absolute Maximum Ratings
Parameter Forward current Reverse voltage RMS ON-state current *1 Peak one cycle surge current Repetitive peak OFF-state voltage *2 Isolation voltage Operating temperature Storage temperature *3 Soldering temperature Symbol IF VR IT Isurge VDRM Viso Topr Tstg Tsol Rating 50 6 0.3 3 400 4 000 - 25 to +80 - 40 to +125 260
(Ta = 25˚C ) Unit mA V Arms A V Vrms ˚C ˚C ˚C
Input
Output
*1 50Hz sine wave *2 40 to 60% RH, AC for 1 minute, f=60Hz *3 For 10 seconds
“ In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that occur in equipment using any of SHARP's devices, shown in c...
Similar Datasheet