4.6W AUDIO POWER AMP
4.6W AUDIO POWER AMP
S1A2206D01
INTRODUCTION
The S1A2206D01 is a monolithic integrated circuit consisting of a 2channe...
Description
4.6W AUDIO POWER AMP
S1A2206D01
INTRODUCTION
The S1A2206D01 is a monolithic integrated circuit consisting of a 2channel power amplifier. It is suitable for the stereo and bridge amplifier application of a radio cassette tape recorder. 12-DIPH-300
FEATURES
High power output Stereo : PO = 2.3 W (Typ) at VCC = 9 V, RL = 4 Bridge : PO = 4.7 W (Typ) at VCC = 9 V, RL = 8 Low switching distortion at high frequency Reduced shock noise at the time of power on/off due to a built-in muting circuit Good ripple rejection due to a built-in ripple filter Good channel separation Soft tone at the time of output saturation Closed loop voltage gain fixed at 45dB (Bridge : 51 dB) but availability with external resistor added Minimum number of external parts required Easy-to-design radiator fin 16-DIP-300A
ORDERING INFORMATION
Device S1A2206D01-H0B0 S1A2206D01-D0B0 Package 12-DIPH-300 16-DIP-300A Operating Temperature − 20°C − + 70°C
1
S1A2206D01
4.6W AUDIO POWER AMP
BLOCK DIAGRAM
VCC 12 (16)
OUT1 (15) 11
BS1 10 (14)
POWER GND (13) (12) FIN
NF1 9 (11)
IN1 8 (10)
PRE GND (9) 7
OUT AMP1 RIPPLE FILTER OUT AMP2
IN AMP2
Shock Noise Rejector
IN AMP2
1
(1)
2 OUT2
(2)
3 BS2
(3)
(4)
FIN
(5)
4 NF2
(6)
5 IN2
(7)
6 R.R
(8)
BTL OUT
POWER GND
NOTE: () 16-DIP Package
ABSOLUTE MAXIMUM RATINGS (Ta = 25°C)
Characteristic Supply Voltage Power Dissipation Operating Temperature Storage Temperature * Fin is soldered on the PCB
Symbol VCC PD TOPR TSTG
Value 15
...
Similar Datasheet