DATA SHEET
Bipolar Analog Integrated Circuit
µPC1909
SWITCHING REGULATOR CONTROL IC
The µPC1909 is a switching regul...
DATA SHEET
Bipolar Analog Integrated Circuit
µPC1909
SWITCHING
REGULATOR CONTROL IC
The µPC1909 is a switching
regulator control IC ideal for primary side control of active-clamp type
Note
DC/DC
converters. This IC has 2 outputs employing a totem-pole circuit with peak output current 1.2 A, and is capable of directly driving a power MOS-FET. As a result, it has been possible to realize primary side control of an active-clamp type converter on a single chip. Note It is necessary to obtain license from Vicor Corporation before using the µPC1909 in an active-clamp type circuit.
FEATURES
2 on-chip outputs; for Q and Q Capable of directly driving a power MOS-FET Drive supply voltage range: 7 V to 24 V On-chip remote control circuit On-chip pulse-by-pulse overcurrent protection circuit On-chip overvoltage latch circuit
ORDERING INFORMATION
Part Number Package 16-pin plastic DIP (300 mils) 16-pin plastic SOP (300 mils)
µPC1909CX µPC1909GS
The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for availability and additional information.
Document No. G14309EJ1V0DS00 (1st edition) Date Published July 1999 N CP(K) Printed in Japan
©
1999
µPC1909
BLOCK DIAGRAM
CT 16 RT 15 VREF 14 DTC1 13 FB 12 PWM comparator 1 – + + OUT1 11 EMI1 10 VCC 9
Oscillator
Reference power supply
OLS
...