Document
W005 - W10
PRV : 50 - 1000 Volts Io : 1.5 Ampere
FEATURES :
* * * * * * * Glass passivated chip High case dielectric strength High surge current capability High reliability Low reverse current Low forward voltage drop Ideal for printed circuit board
SILICON BRIDGE RECTIFIERS WOB
0.39 (10.0) 0.31 (7.87) 0.22 (5.59) 0.18 (4.57)
+
AC
1.00 (25.4) MIN.
1.10 (27.9) MIN.
0.034 (0.86) 0.028 (0.71)
MECHANICAL DATA :
* Case : Reliable low cost construction utilizing molded plastic technique * Epoxy : UL94V-O rate flame retardant * Terminals : Plated leads solderable per MIL-STD-202, Method 208 guaranteed * Polarity : Polarity symbols marked on case * Mounting position : Any * Weight : 1.29 grams
Rating at 25 °C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%.
AC +
AC
0.22 (5.59) 0.18 (4.57)
0.22 (5.59) 0.18 (4.57)
Dimension in inches and (millimeter)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
RATING
Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Current 0.375" (9.5 mm) lead length Peak Forward Surge Current Single half sine wave Superimposed on rated load (JEDEC Method) Rating for fusing ( t < 8.3 ms. ) Ta = 25 °C Ta = 100 °C Maximum Forward Voltage per Diode at IF = 1.0 Amp. Maximum DC Reverse Current at Rated DC Blocking Voltage Typical Thermal Resistance (Note 2) Operating Junction Temperature Range Storage Temperature Range
SYMBOL W005
VRRM VRMS VDC IF(AV) I FSM It VF IR IR(H) CJ RθJA TJ T STG
2
W01 100 70 100
W02 200 140 200
W04 400 280 400 1.5 50 10 1.0 10 1.0 14 36
W06 600 420 600
W08 800 560 800
W10 1000 700 1000
UNIT
Volts Volts Volts Amps. Amps. A2S Volts µA mA pf °C/W °C °C
50 35 50
Typical Junction Capacitance per Diode (Note 1)
- 50 to + 150 - 50 to + 150
Notes :
1 ) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts. 2 ) Thermal resistance from Junction to Ambient at 0.375" (9.5 mm) lead length P.C. Board mounting.
UPDATE : JANUARY 24, 2000
RATING AND CHARACTERISTIC CURVES ( W005 - W10 )
FIG.1 - DERATING CURVE FOR OUTPUT RECTIFIED CURRENT
1.5 50
PC Board 0.375(9.5mm)
FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT
AVERAGE FORWARD OUTPUT CURRENT, AMPERES
1.2
PEAK FORWARD SURGE CURRENT, AMPERES
40
T J = 55 ° C
0.9
Copper Pads 0.22" x 0.22" (5.5 x5.5mm)
30
0.6
20 SINGLE HALF SINE WAVE (JEDEC METHOD)
0.3 60 Hz, Resistive or Inductive load. 0 0 25 50 75 100 125 150 175
10
0
1
2
4
6
10
20
40
60
100
CASE TEMPERATURE, ( ° C)
NUMBER OF CYCLES AT 60Hz
FIG.3 - TYPICAL FORWARD CHARACTERISTICS REVERSE CURRENT, MICROAMPERES
20 10
FIG.4 - TYPICAL REVERSE CHARACTERISTICS
FORWARD CURRENT, AMPERES
10
T J = 100 °C
1
1.0
0.1
TJ = 25 °C Pulse Width = 300 µ s 1 % Duty Cycle
0.1
T J = 25 °C
0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8
0.01 0 20 40 60 80 100 120 140
FORWARD VOLTAGE, VOLTS
PERCENT OF RATED REVERSE VOLTAGE, (%)
.