Real Time Clock/Calendar/Alarm with EEPROM
16K
X1243
Real Time Clock/Calendar/Alarm with EEPROM
DESCRIPTION
2-Wire™ RTC
FEATURES • 2 Alarms—Interrupt Output —Se...
Description
16K
X1243
Real Time Clock/Calendar/Alarm with EEPROM
DESCRIPTION
2-Wire™ RTC
FEATURES 2 Alarms—Interrupt Output —Settable on the Second, 10s of Seconds, Minute, 10s of Minutes, Hour, Day, Month, or Day of the Week —Repeat alarm for time base generation 2 Wire Interface interoperable with I2C. —400kHz data transfer rate Secondary Power Supply Input with internal switch-over circuitry. Year 2000 Compliant 2K bytes of EEPROM —64 Byte Page Write Mode —3 bit Block Lock Low Power CMOS —<1µA Operating Current —<3mA Active Current during Program —<400µA Active Current during Data Read Single Byte Write Capability Typical Nonvolatile Write Cycle Time: 5ms High Reliability —100,000 Endurance Cycles —Guaranteed Data Retention: 100 Years Small Package Options —8-Lead SOIC Package, 8L TSSOP Package
The X1243 is a Real Time Clock with clock/calendar circuits and two alarms. The dual port clock and alarm registers allow the clock to operate, without loss of accuracy, even during read and write operations. The clock/calendar provides functionality that is controllable and readable through a set of registers. The clock, using a low cost 32.768kHz crystal input, accurately tracks the time in seconds, minutes, hours, date, day, month and years. It has leap year correction, automatic adjustment for the year 2000 and months with less than 31 days. An alarm match of the RTC sets an interrupt flag and activates an interrupt pin. An alternative alarm function provides a pulse...
Similar Datasheet