ZSH330

SUPPLY VOLTAGE MONITOR ISSUE 1 - DECEMBER 1997 DEVICE DESCRIPTION The ZSH330 is a three terminal under voltage monitor circuit for use in microprocessor systems. The threshold voltage of the device has been set to 3.1 volts making it ideal for 3.3 volt circuits. Included in the device is a precise voltage reference and a comparator with built in hysteresis to prevent erratic operation. The ZSH330 features an open collector output capable of sourcing at least l0mA which only requires a single external resistor to interface to following circuits. Operation of the device is guaranteed from one volt upwards, from this level to the device threshold voltage the output is held high providing a power on reset function. Should the supply voltage, once established, at any time drop below the threshold level then the output again will pull high. The device is available in a TO92 package for through hole applications as well as SO8 and SOT223 for surface mount requirements. ZSH330 FEATURES SO8, SOT223 and TO92 packages Power on reset generator Automatic reset generation Low standby current Guaranteed operation from 1 volt Wide supply voltage range Internal clamp diode to discharge delay capacitor 3.1 volt threshold for 3.3 volt logic 20mV hysteresis prevents erratic operation APPLICATIONS Microprocessor systems Computers Computer peripherals Instrumentation Automotive Battery powered equipment SCHEMATIC DIAGRAM Vcc Out Gnd 4-329 ZSH330 ABSOLUTE MAX...