4:1 HIGH SPEED MULTIPLEXER
ZXFV302
4:1 HIGH SPEED MULTIPLEXER
DEVICE DESCRIPTION
The ZXFV302 is a 4:1 high speed analog switch designed for use as...
Description
ZXFV302
4:1 HIGH SPEED MULTIPLEXER
DEVICE DESCRIPTION
The ZXFV302 is a 4:1 high speed analog switch designed for use as a buffered video multiplexer and other high-speed applications. It features low different gain and phase distortion. The high speed high output current capability provides 75⍀ cable drive for use in high performance video applications. The input channel is selected by means of two logic lines using an internal decoder. An output enable line allows expansion to eight channels using two devices ZXFV302 as shown in the example application figure 1. An alternative device, ZXFV301 provides the same functionality and pin-out as the ZXFV302 but with four separate logic lines controlling the switch channels directly.
FEATURES AND BENEFITS
3dB Bandwidth 300MHz Slew rate 450V/ s Differential gain 0.01% Differential phase 0.04Њ Output current 40mA Stable up to 100pF load Ϯ5 Volt supply Supply current 17mA 16 pin SO package
APPLICATIONS
Video routing and switching CCTV switching Video distribution selection RGB multiplexing
Connection Diagram
High frequency instrumentation Data acquisition Data acquisition
IN 1 0V IN 2 0V
1 2 3 4 5 6 7 8
16 15 14 13 12 11 10 9
V+ OUT 0V EN A0 A1 NC NC
IN3
0V IN 4 V-
ZXFV302
Ordering information
Part Number ZXFV302N16TA ZXFV302N16TC Container Reel 7 ″ Reel 13 ″ Increment 500 2500
Fig.1:Typical Application for 8 channel CCTV
ISSUE 4 - NOVEMBER 2002 1
ZXFV302
ABSOLUTE MAXIMUM RATINGS
Supply volt...
Similar Datasheet