ADJUSTABLE DC-DC BOOST CONVERTER
ZXLD1615
ADJUSTABLE DC-DC BOOST CONVERTER WITH INTERNAL SWITCH IN TSOT23-5
DESCRIPTION
The ZXLD1615 is a PFM inductive b...
Description
ZXLD1615
ADJUSTABLE DC-DC BOOST CONVERTER WITH INTERNAL SWITCH IN TSOT23-5
DESCRIPTION
The ZXLD1615 is a PFM inductive boost converter designed to provide output voltages of up to 28V from a 2.5V to 5.5V input supply. The ZXLD1615 includes the output switch and peak current sense resistor, and can provide up to 10mA output current at maximum output voltage. Higher current is available at lower output voltages. Quiescent current is typically 60A and a shutdown function is provided to reduce this current to less than 100nA in the 'off' state. Nominal output voltage can be set up to a maximum of 28V by two external resistors and can be adjusted to lower values by a PWM control signal applied to the 'Enable' pin. Depending upon the control frequency, the PWM signal will provide either continuous (low ripple) or gated control. The PWM filter components are contained within the chip. Minimum output voltage is determined by the input supply. The device is assembled in a low profile TSOT23-5 pin package.
ADVANCED FEATURES
Internal 30V NDMOS switch True analog output voltage control via PWM
with internal filter
APPLICATIONS
LCD and OLED bias Cellular / mobile phones Digital cameras PDAs LCD modules Varactor and PIN diode bias Palmtop computers
FEATURES
Low profile TSOT23-5 pin package Internal PWM filter for adjustable output High efficiency (85% typ) Wide input voltage range: 2.5V to 5.5V Up to 250mA output current at 5V Low quiescent current: (60A ...
Similar Datasheet