High Speed Amplifier for Photomultiplier Tubes
HIGH SPEED AMPLIFIER
FOR PHOTOMULTIPLIER TUBES
C5594 SERIES
Gain: 36 dB (Voltage Gain of 63) Frequency Bandwidth: 50 k ...
Description
HIGH SPEED AMPLIFIER
FOR PHOTOMULTIPLIER TUBES
C5594 SERIES
Gain: 36 dB (Voltage Gain of 63) Frequency Bandwidth: 50 k to 1.5 GHz
The C5594 is designed as the most suitable amplifier unit for photomultiplier tubes and a non-inverting type amplifier. This unit has high gain of 36 dB (voltage amplification of 63) and wide frequency bandwidth of 50 kHz to 1.5 GHz, which can accurately amplitude the PMT pulse output. Therefore it is well-matched to the application of Time Correlated Single Photon Counting (TCPC) for fluorescence life time measurement with MCP-PMT and various time response measurements with PMTs. It is possible to be operated at the applied voltage range of +12 to +16 volts. The input and output connectors can be chosen by the combination of SMA and/or BNC.
TACCF0117
MAXIMUM RATINGS
Parameter Supply Voltage Input Signal Power Operating Temperature Storage Temperature Symbol Vcc Pin Ta Tstg Value +17 +10 0 to +50 -40 to +60 Unit V dBm
RECOMMENDED OPERATING VOLTAGE RANGE
Parameter Supply Voltage
Recommended Voltage: +15V
Symbol Vcc
Value +12 to +16
Unit V
SPECIFICATIONS (at Vcc = +15 V/Ta = +25 )
Parameter Upper Cutoff Frequency Lower Cutoff Frequency Gain Gain Flatness Noise Figure Input/Output Impedance Current Consumption Symbol fc (HIGH) fc (LOW) G G NF – Icc Condition 3 dB down point from the gain at 0.1 GHz f = 0.1 GHz f = 200 k to 1 GHz Min. 1.2 – 34 – – – – Typ. 1.5 50 36 ± 1.0 5 50 95 Max. – 100 – – – – – Unit GHz kHz dB dB dB mA
Subject to local t...
Similar Datasheet