Document
CMOS Digital Integrated Circuits Silicon Monolithic
TC7SZU04F
TC7SZU04F
1. Functional Description
• Inverter (Unbuffer)
2. Features
(1) AEC-Q100 (Rev. H) (Note 1) (2) Wide operating temperature range: Topr = -40 to 125 (Note 2) (3) High output current: ±16 mA (min) at VCC = 4.5 V (4) Low power dissipation: ICC = 2 µA (max) at VCC = 5.5 V, Ta = 25 (5) Operation voltage range: VCC = 1.65 to 5.5 V (6) 5.5 V tolerant inputs Note 1: This device is compliant with the reliability requirements of AEC-Q100. For details, contact your Toshiba sales
representative. Note 2: For devices with the ordering part number ending in J(CT. Topr = -40 to 85 for the other devices.
3. Packaging
SMV
4. Marking and Pin Assignment
Marking
©2016-2017 Toshiba Electronic Devices & Storage Corporation
1
Pin Assignment (Top view)
Start of commercial production
1998-08 2017-12-21
Rev.3.0
5. IEC Logic Symbol
TC7SZU04F
6. Truth Table
A
Y
L
H
H
L
7. Absolute Maximum Ratings (Note) (Unless otherwise specified, Ta = 25 )
Characteristics
Symbol
Note
Rating
Unit
Supply voltage
VCC
-0.5 to 6.0
V
Input voltage
VIN
-0.5 to 6.0
V
DC output voltage
VOUT
-0.5 to VCC + 0.5
V
Input diode current
IIK
-20
mA
Output diode current
IOK
(Note 1)
±20
mA
DC output current
IOUT
±50
mA
VCC/ground current
ICC
±50
mA
Power dissipation
PD
200
mW
Storage temperature
Tstg
-65 to 150
Note: Exceeding any of the absolute maximum ratings, even briefly, lead to deterioration in IC performance or even destruction. Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings and the operating ranges. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc).
Note 1: VOUT < GND, VOUT > VCC
8. Operating Ranges (Note)
Characteristics
Symbol
Note
Rating
Unit
Supply voltage
Input voltage Output voltage Operating temperature
VCC
1.65 to 5.5
V
(Note 1)
1.5 to 5.5
VIN
0 to 5.5
V
VOUT
0 to VCC
V
Topr
(Note 2)
-40 to 125
(Note 3)
-40 to 85
Note: The operating ranges must be maintained to ensure the normal operation of the device. Unused inputs must be tied to either VCC or GND.
Note 1: Data retention only Note 2: For devices with the ordering part number ending in J(CT. Note 3: For devices except those with the ordering part number ending in J(CT.
©2016-2017 Toshiba Electronic Devices & Storage Corporation
2
2017-12-21 Rev.3.0
TC7SZU04F
9. Electrical Characteristics 9.1. DC Characteristics (Unless otherwise specified, Ta = 25 )
Characteristics High-level input v.