www.vishay.com
End of Life June-2024
TCED4100
Vishay Semiconductors
Optocoupler, Photodarlington Output, Dual Channel, High Gain
DESCRIPTION
The TCED4100 consists of a phototransistor optically coupled to a gallium arsenide infrared-emitting diode in a 8-pin (dual) or 16-pin (quad) plastic dual inline package.
The elements are mounted on one leadframe providing a fixed distance between input and output for highest safety requirements.
C
E
1
A
C 8 pin
16 pin
LINKS TO ADDITIONAL RESOURCES
Product Page
Design Tools
Models
Footprints
Schematics
VDE STANDARDS
These couplers perform safety functions according to the following equipment standards:
• DIN EN 60747-5-5 (VDE 0884) Optocoupler for electrical safety requirements
• IEC 60950 / EN 60950 Office machines (applied for reinforced isolation for mains voltage ≤ 400 VRMS)
• VDE 0804 Telecommunication apparatus and data processing
• IEC 60065 Safety for mains-operated electronic and related household apparatus
FEATURES • Isolation materials according to UL 94 V-0 • Pollution degree 2 (DIN/VDE 0110/resp.
IEC 60664) • Climatic classification 55/100/21 (IEC 60068
part 1) • Special construction: therefore, extra low
coupling capacity of typical 0.2 pF, high common mode rejection • Low temperature coefficient of CTR • Creepage current resistance according to VDE 0303 / IEC 60112 comparative tracking index: CTI ≥ 175 • Rated impulse voltage (transient overvoltage) VIOTM = 8 kV peak • Isolation test voltage (partial discharge test voltage) Vpd = 1.6 kV peak • Rated isolation voltage (RMS includes DC) VIOWM = 600 VRMS • Rated recurring peak voltage (repetitive) VIORM = 848 V peak • Thickness though insulation ≥ 0.75 mm • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
APPLICATIONS • Switch-mode power supplies • Line receiver • Computer peripheral interface • Microprocessor system interface • Circuits for safe protective separation against electrical
shock according to safety class II (reinforced isolation): - for appl. class I - IV at mains voltage ≤ 300 V - for appl. class I - III at mains voltage ≤ 600 V
according to DIN EN 60747-5-5 (VDE 0884)
AGENCY APPROVALS • UL • cUL
Rev. 1.8, 15-Jan-2024
1
Document Number: 83728
For technical questions, contact:
[email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
www.vishay.com
End of Life June-2024
TCED4100
Vishay Semiconductors
ORDERING INFORMATION
T
C
E
AGENCY CERTIFIED / PACKAGE UL, cUL DIP-16
D
4
PART NUMBER
1
0
0
CTR (%) ≥ 600
TCED4100
DIP-# 7.62 mm
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
VALUE
UNIT
INPUT
Peak reverse voltage Forward continuous current Forward surge current Power dissipation Junction temperature OUTPUT
tp ≤ 10 μs
VR
6.0
V
IF
60
mA
IFSM
1.5
.