TD340
H-BRIDGE QUAD POWER MOSFET DRIVER FOR DC MOTOR CONTROL
PRELIMINARY DATA
s QUAD N-CHANNEL MOSFET DRIVE s INTEGRATE...
TD340
H-BRIDGE QUAD POWER MOSFET DRIVER FOR DC MOTOR CONTROL
PRELIMINARY DATA
s QUAD N-CHANNEL MOSFET DRIVE s INTEGRATED CHARGE PUMP FOR HIGH
SIDE MOSFET DRIVING
s VERY LOW GROUND EMI NOISE s MOTOR SPEED AND DIRECTION CONTROL (LOW SIDE PWM)
s INTERNAL OR EXTERNAL PWM SOURCE s 25kHz SWITCHING FREQUENCY ABILITY s SYNCHRONOUS HIGH SIDE RECTIFICATION
s REVERSED BATTERY ACTIVE PROTECTION ABILITY
D SO20 (Plastic Micropackage)
s INTEGRATED 5V POWER SUPPLY FOR
MICROCONTROLLER
s INTEGRATED SECURITY CIRCUITS:
UVLO, OVLO, WATCHDOG
s 60V MAX RATING
DESCRIPTION The TD340 integrated circuit allows N-Channel Power Mosfets driving in a full H-bridge configuration and is best suited for DC Motor Control Applications. The four drivers outputs are designed to allow 25kHz MOSFET switching. The speed and direction of the motor are to be set by two pins. Voltage across the motor is controlled by low side Pulse Width Modulation (PWM). This PWM feature can be made internally when the input pin is connected to an analog signal, or it can be given directly from a digital source. An internal charge pump allows proper upper MOS driving for full static operation (100% PWM). TD340 achieves very low EMI noise thanks to its balanced charge pump structure and its drivers moderate slew rate. To avoid excessive heating due to free wheeling, appropriate synchronous rectification is achieved on the corresponding High Side MOSFET. Moreover, TD340 integrates a 5V voltage
regulator suitable as a power suppl...