Document
TD62601~604P/F
TOSHIBA BIPOLAR DIGITAL INTEGRATED CIRCUIT SILICON MONOLITHIC
TD62601P,TD62601F,TD62602P,TD62602F TD62603P,TD62603F,TD62604P,TD62604F
6CH THRESHOLD FREE DRIVER
TD62601P, TD62601F INVERTER
TD62602P, TD62602F INVERTER / OPEN COLLECTOR
TD62603P, TD62603F NON−INVERTER
TD62604P, TD62604F NON−INVERTER / OPEN COLLECTOR
The TD62601P, TD62601F series are threshold free drivers which are comprised of six NPN transistor output stages and comparator input stages. The TD62601P, TD62601F series are pin compatible with CMOS 4049B and 4050B type except Vref terminal. Vref is set at 1 / 2 VCC with internal resistors and it is change able using external resistors. Applications include relay, hammer, lamp and display (LED) drivers.
FEATURES
Wide supply voltage range VCC = 4~18 V Vref = 1 / 2 VCC @16 pin is non−connected Pin compatible with CMOS logic 4049B, 4050B type TD62601P, TD62601F (4049B type) TD62602P, TD62602F (4049B type open−collector) TD62603P, TD62603F (4050B type) TD62604P, TD62604F (4050B type open−collector) Package type−P : DIP−16 pin Package type−F : SOP−16 pin
TD62601P, TD62602P TD62603P, TD62604P
TD62601F, TD62602F TD62603F, TD62604F
Weight DIP16-P-300-2.54A: 1.11 g (typ.) SOP16-P-225-1.27: 0.16 g (typ.)
PIN CONNECTION (TOP VIEW)
TD62601P, TD62601F, TD62602P, TD62602F
TD62603P, TD62603F, TD62604P, TD62604F
Downloaded from Elcodis.com electronic components distributor
1
2006-06-14
SCHEMATICS (EACH DRIVER)
TD62601P, TD62601F, TD62602P, TD62602F
TD62601~604P/F
TD62603P, TD62603F, TD62604P, TD62604F
Note: The output parasitic diodes cannot be used as clamp diodes.
ABSOLUTE MAXIMUM RATINGS (Ta = 25°C)
CHARACTERISTIC
SYMBOL
RATING
UNIT
Supply Voltage Output Sustaining Voltage Output Current Input Voltage
Power Dissipation
Operating Temperature Storage Temperature
P F
VCC VOUT IOUT VIN
20 V
−0.5~20
V
10 mA / ch
−0.5~VCC + 0.5
V
PD (Note 2)
1.0 0.625 (Note 1)
W
Topr
−40~85
°C
Tstg
−55~150
°C
Note 1: On PCB (30 × 30 × 1.6 mm Cu 50%) Note 2: Delated above 25°C in the proportion of 8.0 mW / °C (P Type), 5.0 mW / °C (F Type).
RECOMMENDED OPERATING CONDITIONS (Ta = −40~85°C, VCC = 0 V)
CHARACTERISTIC
Supply Voltage Output Sustaining Voltage
62602P, 62602F 62604P, 62604F
Output Current
Input Voltage
REF, Input Voltage
Power Dissipation
P F
SYMBOL VCC VOUT
CONDITION ― ―
IOUT VIN Vref
PD
VCC = 5 V Ta = 25°C On PCB
― ―
MIN TYP. MAX UNIT
4.0 ― 18
V
0 ― 18 V
0
―
8
mA / ch
0 ― VCC V
0.4
―
VCC − 1.6
V
― ― 0.36 W
― ― 0.325
Downloaded from Elcodis.com electronic components distributor
2
2006-06-14
ELECTRICAL CHARACTERISTICS (Ta = 25°C)
CHARACTERISTIC
SYMBOL
TEST CIR− CUIT
TEST CONDITION
Input Voltage
"H" Level "L" Level
VIH ― VIL ―
― ―
Output Current
"H" Level
TD62602P TD62602F TD62604P TD62604F
Output Voltage
"H" Level
TD62601P TD62601F TD62603P TD62603F
"L" Level
Input Current
"H" Level "L" Level
IOH ― VCC = 4.5V, VO = 18V
VOH
VOL IIH IIL
―
VCC = 4.5V, IO = −10 µA
― VCC = 4.5V, IO = 8 mA ―― ――
Vref Terminal Voltage
Vref (OUT)
―
―
Vref Resistor
Supply Current
Turn−On Delay Turn−Off Delay
TD62601P TD62601F TD62603P TD62603F
Rref ICC
ICCL
tON tOFF
―― ――
――
― VCC = 5 V, VOUT = 18 V ― RL = 2 kΩ
TD62601~604P/F
MIN TYP. MAX UNIT
Vref +
―
―
0.1 V
― ― Vref −
0.1
― ― 10 µA
4.0 ―
―
― ― ― 1/2 VCC − 0.1 3.5 ―
0.1 ― −0.2
―
5 ―
0.4 2 −1.5 1/2 VCC + 0.1 6.5 12
V
µA V kΩ mA
― ― 27 mA
― 0.5 ― µs
― 0.2 ―
PRECAUTIONS for USING
This IC does not integrate protection circuits such as overcurrent and overvoltage protectors. Thus, if excess current or voltage is applied to the IC, the IC may be damaged. Please design the IC so that excess current or voltage will not be applied to the IC. Utmost care is necessary in the design of the output line, VCC and GND line since IC may be destroyed due to short−circuit between outputs, air contamination fault, or fault by improper grounding.
Downloaded from Elcodis.com electronic components distributor
3
2006-06-14
PACKAGE DIMENSIONS
DIP16−P−300−2.54A
TD62601~604P/F
Unit: mm
Weight: 1.11 g (typ.)
Downloaded from Elcodis.com electronic components distributor
4
2006-06-14
PACKAGE DIMENSIONS
SOP16−P−225−1.27
TD62601~604P/F
Unit: mm
Weight: 0.16 g (typ.)
Downloaded from Elcodis.com electronic components distributor
5
2006-06-14
TD62601~604P/F
Notes on Contents
Equivalent Circuits
The equivalent circuit diagrams may be simplified or some parts of them may be omitted for explanatory purposes.
IC Usage Considerations
Notes on Handling of ICs
(1) The absolute maximum ratings of a semiconductor device are a set of ratings that must not be exceeded, even for a moment. Do not exceed any of these ratings. Exceeding the rating(s) may cause the device breakdown, damage or deterioration, and may result injury by explosion or combustion.
(2) Use an appropriate power supply fuse to ensure that a large current does not continuously flow in case of over current and/or IC failure. The IC wi.