THREE-CHANNEL SMALL-SIGNAL IGBT GATE DRIVER
TOSHIBA BIPOLAR DIGITAL IC SILICON MONOLITHIC
TD62930P,TD62930F
TD62930P/F
THREE−CHANNEL SMALL−SIGNAL IGBT GATE DRIVER...
Description
TOSHIBA BIPOLAR DIGITAL IC SILICON MONOLITHIC
TD62930P,TD62930F
TD62930P/F
THREE−CHANNEL SMALL−SIGNAL IGBT GATE DRIVER
The TD62930P and TD62930F are drivers using 5 V−signal input to output the signals required to drive IGBT gates. TD62930P / F is the most suitable for low−side drive of a miniature IGBT to use for inverter for the household electric appliances mainly. The outputs are separated into high−side and low−side outputs. This separation simplifies the IGBT gate on / off timing control. Two output signals are assigned for one input signal. The high−side output is high−level for high−level input, and high impedance for low−level input. The low−side output is high impedance for high−level input, and low−level for low−level input.
FEATURES
Power supply voltage (absolute maximum rating) High−voltage block power supply voltage VCC = 30 V Low−voltage block power supply voltage VDD = 7 V Output current (absolute maximum rating) High−side peak current IOUT = −0.4 A (max) Low−side peak current IOUT = 0.4 A (max) Input−output response speed tpHL, tpLH ≤ 1 µs (max)
Package : DIP16 / SSOP16 (1.00 mm pitch)
TD62930P
TD62930F
Weight DIP16-P-300-2.54A: 1.11 g (typ.) SSOP16-P-225-1.00A: 0.14 g (typ.)
1 2006-06-14
PIN ASSIGNMENT (TOP VIEW)
TD62930P/F
INTERNAL EQUIVALENT CIRCUIT
PIN DESCRIPTION
PIN No.
1, 8 2
3, 7 4, 5, 6 11, 14 9, 12, 15 10, 13, 16
PIN NAME
VCC VDD L−GND IN1~3 P−GND OUT−L1~3 OUT−H1~3
FUNCTION
30 V supply pins 5 V supply pin Ground pins for 5 V supply Input...
Similar Datasheet