TD6304,08AP
TOSHIBA Bipolar Digital Integrated Circuit Silicon Monolithic
TD6304AP,TD6308AP
Auto Reverse & Auto Eject Pl...
TD6304,08AP
TOSHIBA Bipolar Digital Integrated Circuit Silicon Monolithic
TD6304AP,TD6308AP
Auto Reverse & Auto Eject Plunger Driver
TD6304AP, TD6308AP are IC developed for auto reverse / auto eject on a car stereo. There are two methods for driving the plunger; one is to drive it after motor rotation detecting signal is stopped and the other is to drive it optionally by program switch. Further, this IC can be used as a solenoid driver in the control circuit of a stereo, remote control system and other electric accessories.
Features
· Plunger driving output
transistor is built in. No.6 pin output IOUT = 200mA (VCE (sat) = 0.7V (max.))
· Manual operation by program switch is possible. · Time for output pulse generation after rotation detecting
signal is stopped and output pulse width are variable by external mounted capacitor and resistor. (Duty cycle of output pulse is set inside IC)
· A load dump circuit is built in for protection from overvoltage.
· Operating supply voltage VCC (opr) = 8~16 V (7 pin voltage)
· TD6304AP is 1 / 4 duty cycle. · TD6308AP is 1 / 8 duty cycle.
Weight: 0.7g (typ.)
Pin Connection (side view)
1 2002-10-30
Block Diagram
TD6304,08AP
Pin Description
Pin No.
Symbol
1 Prog
2 Input
3 OSC
5 E-out
6 Out 7 VCC 4 GND
Designation
Program switch terminal
Rotation detecting signal input terminal
Oscillator terminal
Emitter output terminal
Plunger output terminal
Power terminal
Earth terminal
Function
Terminal used for forcing plunger output on rega...