TDA1313

INTEGRATED CIRCUITS DATA SHEET TDA1313; TDA1313T Stereo continuous calibration DAC (CC-DAC) Objective specification File under Integrated Circuits, IC01 July 1993 Philips Semiconductors Objective specification Stereo continuous calibration DAC (CC-DAC) FEATURES 4/8 × oversampling (multiplexed/simultaneous input) possible Voltage output (capable of driving headphone) Space saving package (SO16 or DIL16) Low power consumption Wide dynamic range (16-bit resolution) Continuous Calibration concept Easy application: – single 3 to 5.5 V supply rail – output voltage is proportional to the supply voltage – integrated current-to-voltage converter Internal bias current ensures maximum dynamic range Wide operating temperature range (−40 °C to +85 °C) Compatible with most current Japanese input format multiplexed/simultaneous, two's complement and CMOS) No zero crossing distortion Cost efficient High signal-to-noise ratio Low total harmonic distortion. ORDERING INFORMATION PACKAGE EXTENDED TYPE NUMBER PINS TDA1313(1) TDA1313T(2) Notes 1. SOT38-1; 1996 August 15. 2. SOT109-1; 1996 August 15. 16 16 PIN POSITION DIL SO16 TDA1313; TDA1313T GENERAL DESCRIPTION The TDA1313; 1313T is a voltage driven digital-to-analog converter, and is of a new generation of DACs which incorporates the innovative technique of Continuous Calibration (CC). The largest bit-currents are repeatedly generated from one single current reference source. This duplication is based upon an in...