TDA1314T

Philips Semiconductors Product specification Quadruple filter DAC FEATURES High dynamic range to enable digital DSP (Digital Signal Processor) volume control 18 bits data input format for each of the four channels Four times bit-serial oversampling filter 1st-order 4fas (audio sampling frequency) noise shaper Four very low noise DACs Only 1st-order analog post filtering required Smooth power-on of the DAC output currents Because of the automatic digital PLL divider range setting the master clock is selectable in a wide 4fas integer range Insensitive to jitter on the I2S-bus signals with respect to the DAC total harmonic distortion deterioration. QUICK REFERENCE DATA Vref = 2.5 and 5 V; Tamb = 25 °C; all voltages referenced to ground; unless otherwise specified. SYMBOL VDDA VDDD IO(DAC) VO(DAC) PARAMETER analog supply voltage digital supply voltage DAC output current (FS) DAC output voltage, nominal DAC operational amplifier output voltage DAC resolution total harmonic distortion plus noise-to-signal ratio dynamic range of DAC digital silence total power dissipation operating ambient temperature Rref = 20.5 kΩ RL ≥ 5 kΩ; Rfb = 3 kΩ CONDITIONS MIN. 4.5 4.5 ±0.4 1.0 TYP. 5.0 5.0 ±0.5 − APPLICATIONS TDA1314T Stand-alone quadruple low noise DAC Car radio DAC in conjunction with DSP. GENERAL DESCRIPTION The TDA1314T is a quadruple very low noise high dynamic range DAC which is intended for use in motor cars and is controlled by the car radio DSP. Each channel ...