TDA1572T

INTEGRATED CIRCUITS DATA SHEET TDA1572T AM receiver Product specification File under Integrated Circuits, IC01 May 1992 Philips Semiconductors Product specification AM receiver GENERAL DESCRIPTION The TDA1572T integrated AM receiver circuit performs all the active functions and part of the filtering required of an AM radio receiver. It is intended for use in mains-fed home receivers and car radios. The circuit can be used for oscillator frequencies up to 50 MHz and can handle RF signals up to 500 mV. RF radiation and sensitivity to interference are minimized by an almost symmetrical design. The controlled-voltage oscillator provides signals with extremely low distortion and high spectral purity over the whole frequency range, even when tuning with variable capacitance diodes. If required, band switching diodes can easily be applied. Selectivity is obtained using a block filter before the IF amplifier. Features TDA1572T Inputs protected against damage by static discharge Gain-controlled RF stage Double balanced mixer Separately buffered, voltage-controlled and temperature-compensated oscillator, designed for simple coils Gain-controlled IF stage with wide AGC range Full-wave, balanced envelope detector Internal generation of AGC voltage with possibility of second-order filtering Buffered field strength indicator driver with short-circuit protection AF preamplifier with possibilities for simple AF filtering Electronic standby switch IF output for ster...