Document
INTEGRATED CIRCUITS
DATA SHEET
TDA4555 TDA4556 Multistandard decoder
Product specification File under Integrated Circuits, IC02 November 1984
Philips Semiconductors
Product specification
Multistandard decoder
GENERAL DESCRIPTION The TDA4555 and TDA4556 are monolithic integrated multistandard colour decoders for the PAL, SECAM, NTSC 3,58 MHz and NTSC 4,43 MHz standards. The difference between the TDA4555 and TDA4556 is the polarity of the colour difference output signals (B-Y) and (R-Y). Features Chrominance part • Gain controlled chrominance amplifier for PAL, SECAM and NTSC • ACC rectifier circuits (PAL/NTSC, SECAM) • Burst blanking (PAL) in front of 64 µs glass delay line • Chrominance output stage for driving the 64 µs glass delay line (PAL, SECAM) • Limiter stages for direct and delayed SECAM signal • SECAM permutator Demodulator part • Flyback blanking incorporated in the two synchronous demodulators (PAL, NTSC) • PAL switch • Internal PAL matrix
TDA4555 TDA4556
• Two quadrature demodulators with external reference tuned circuits (SECAM) • Internal filtering of residual carrier • De-emphasis (SECAM) • Insertion of reference voltages as achromatic value (SECAM) in the (B-Y) and (R-Y) colour difference output stages (blanking) Identification part • Automatic standard recognition by sequential inquiry • Delay for colour-on and scanning-on • Reliable SECAM identification by PAL priority circuit • Forced switch-on of a standard • Four switching voltages for chrominance filters, traps and crystals • Two identification circuits for PAL/SECAM (H/2) and NTSC • PAL/SECAM flip-flop • SECAM identification mode switch (horizontal, vertical or combined horizontal and vertical) • Crystal oscillator with divider stages and PLL circuitry (PAL, NTSC) for double colour subcarrier frequency • HUE control (NTSC) • Service switch
QUICK REFERENCE DATA Supply voltage (pin 13) Supply current (pin 13) Chrominance input signal (peak-to-peak) Chrominance output signal (peak-to-peak) Colour difference output signals (peak-to-peak values) TDA4555: −(R-Y); TDA4556: + (R-Y) TDA4555: −(B-Y); TDA4556: + (B-Y) Sandcastle pulse; required amplitude for vertical and horizontal pulse separation horizontal pulse separation burst gating PACKAGE OUTLINE 28-lead DIL; plastic (SOT117); SOT 117-1; 1996 November 27. V24-9 V24-9 V24-9 typ. typ. typ. 2,5 4,5 7,7 V V V V1-9(p-p) V3-9(p-p) typ. typ. 1,05 1,33 V ± 2 dB V ± 2 dB VP = V13-9 IP = I13 V15-9(p-p) V12-9(p-p) typ. typ. 20 to 200 typ. 1,6 12 65 V mA mV V
November 1984
2
November 1984
Philips Semiconductors
Multistandard decoder
3 Product specification
(1) TDA4555: -(R-Y); TDA4556: + (R-Y) (2) TDA4555: -(B-Y); TDA4556: + (B-Y)
TDA4555 TDA4556
Fig.1 Block diagram.
Philips Semiconductors
Product specification
Multistandard decoder
RATINGS Limiting values in accordance with the Absolute Maximum System (IEC 134) Supply voltage (pin 13) Voltage range at pins 10, 11, 17, 23, 24, 25, 26, 27, 28 to pin 9 (ground) Current at pin 12 Peak value Total power dissipation Storage temperature range Operating ambient temperature range Vn-9 I12 I12M Ptot Tstg Tamb 0 to VP max. max. max. VP = V13-9 max.
TDA4555 TDA4556
13,2
V V
8 15 1,4
mA mA W °C °C
−25 to + 150 0 to + 70
November 1984
4
Philips Semiconductors
Product specification
Multistandard decoder
CHARACTERISTICS VP = V13-9 = 12 V; Tamb = 25 °C; measured in Fig.1; unless otherwise specified PARAMETER Supply (pin 13) Supply voltage range Supply current Chrominance part Chrominance input signal (pin 15) input voltage with 75% colour bar signal (peak-to-peak value) input impedance Chrominance output signal (pin 12) output voltage (peak-to-peak value) output impedance (n-p-n emitter follower) d.c. output voltage Input for delayed signal (pin 10) d.c. input current input resistance Demodulator part (PAL/NTSC) Colour difference output signals output voltage (proportional to V13-9) (peak-to-peak value) TDA4555 − (R-Y) signal (pin 1) − (B-Y) signal (pin 3) TDA4556 + (R-Y) signal (pin 1) + (B-Y) signal (pin 3) Ratio of colour difference output signals (R-Y)/(B-Y) Residual carrier (subcarrier frequency) (peak-to-peak value) Residual carrier (PAL only) (peak-to-peak value) H/2 ripple at (R-Y) output (pin 1) (peak-to-peak value) without input signal D.C. output voltage n-p-n emitter follower with internal current source of 0,3 mA V1,3-9 output impedance Z1, 3-9 − − 7,7 − V1-9(p-p) − − V1,3-9(p-p) − 10 V1,3-9(p-p) − − V1/3-9 − 0,79 V1-9(p-p) V3-9(p-p) − − V1-9(p-p) V3-9(p-p) − − I10 R10-9 − 10 − − V12-9(p-p) Z12-9 V12-9 − − − 1,6 − 8,2 V15-9(p-p) Z15-9 20 2,3 100 3,3 VP = V13-9 IP = I13 10,8 − − 65 SYMBOL MIN. TYP.
TDA4555 TDA4556
MAX.
UNIT
13,2 −
V mA
200 − − 20 − 10 −
mV kΩ V Ω V µA kΩ
1,05 V ± 2 dB − 1,33 V ± 2 dB − 1,05 V ± 2 dB − 1,33 V ± 2 dB − ± 10% − 30 − 10
V V V V
mV mV mV
− 150
V Ω
November 1984
5
Philips Semiconductors
Product specification
Multistandard decoder
TDA4555 TDA4556
SYMBOL MIN. TYP. MAX. UNIT
PARAME.