APA4558

APA4558 Dual Operational Amplifier Features !!Power Supply Range: - Signal Supply : 3V to 20V - Dual Supply : ± 1.5V to ± 10V General Description The APA4558 consists of two independent , high gain , internally frequency compensated operational amplifiers which were designed specifically to operate from a single power supply up to 20 volts . Operation from dual power supplies is also possible and the power supply current drain is essentially independent of the magnitude of the power supply voltage . Application areas include transducer amplifiers , DC gain blocks and all the conventional OP amplifier circuits which can be more easily implemented in single power supply systems . ( For example , the APA4558 can be directly operated from the standard +5V power supply voltage which is normally used in digital systems . ) Large DC Voltage Gain : 100dB Large Output Swing : 0V ~ VDD- 1.5V Bandwidth(unity gain) : 2MHz Internally Frequency Compensated for Unity Gain Low Input Offset Voltage : 1mV Applications !!Amplifiers !!Filters !!Analog Circuit Ordering Information )2)"##& H a n d lin g C o d e T em p. R ange P ackage C ode P ackage C ode J : P D IP K : S O P -8 O : T S S O P -8 Tem p. R ange C : 0 to 7 0 ° C H a n d lin g C o d e TU : Tube TR : Tape & R eel Block Diagram Output A Inverting Input A Non-inverting Input A V,,1 2 3 4 8 V,,+ Output B Inverting Input B Non-inverting Input B -+ +B A 7 6 5 ANPEC reserves the right to make changes to improve reli...