FR1A

FR1A - FR1M GLASS PASSIVATED FAST RECOVERY RECTIFIER Features · · · · · · · For Surface Mounted Applications High Temperature Metallurgically Bonded Contacts Capable of Meeting Environmental Standards of MIL-STD-19500 Plastic Material - UL Flammability Classification 94V-0 High Reliability Submersible Temperature of 265°C for 10 Seconds in Solder Bath Glass Passivated Junction B SMB - DO-214AA Dim A B C Min 3.30 4.00 1.95 0.15 5.00 0.10 0.76 2.00 Max 3.94 4.65 2.21 0.40 6.00 0.20 1.52 2.62 A C D J D E G H J Mechanical Data · · · · · Case: SMB, Molded Plastic Terminals: Solderable per MIL-STD-202, Method 208 Polarity: Cathode Band Approx. Weight: 0.093 grams Mounting Position: Any H G E All Dimensions in mm Maximum Ratings and Electrical Characteristics Ratings at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz resistive or inductive load. Characteristic Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current @ TA = 75°C Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum Instantaneous Forward Voltage at 1.0 A Maximum DC Reverse Current at Rated @ TA = 25°C DC Blocking Voltage @ TA = 125°C Maximum Full Load Reverse Current Full Cycle Average @ TA = 75°C Maximum Reverse Recovery Time (See Note 1) MaximumThermal Resistance (See Note 2) Typical Junction Capacitance (See Note 3) Operating and Storage Temperature...