DatasheetsPDF.com

IC11S-BUR-PNEJR Dataheets PDF



Part Number IC11S-BUR-PNEJR
Manufacturers Hirose
Logo Hirose
Description Single Slot SMT Connectors For Card-Bus Based PC Cards
Datasheet IC11S-BUR-PNEJR DatasheetIC11S-BUR-PNEJR Datasheet (PDF)

Single Slot SMT Connectors For Card-Bus Based PC Cards IC11S Series PC Card Standard Compliant Reduced height : 5.6mm high sFeatures 1. PC Card Standard compliant: • Grounding is required to meet the high speed signal requrements of the PC card standard. Grounding reliability is achieved with a grounding plate and 8 grounding contacts. • Type 1, type 2 and type 3 cards are covered. • Terminals for ground clipping are provided. Wide variety of options (1)Board Mounting ➀Standard type ➁Reverse t.

  IC11S-BUR-PNEJR   IC11S-BUR-PNEJR


Document
Single Slot SMT Connectors For Card-Bus Based PC Cards IC11S Series PC Card Standard Compliant Reduced height : 5.6mm high sFeatures 1. PC Card Standard compliant: • Grounding is required to meet the high speed signal requrements of the PC card standard. Grounding reliability is achieved with a grounding plate and 8 grounding contacts. • Type 1, type 2 and type 3 cards are covered. • Terminals for ground clipping are provided. Wide variety of options (1)Board Mounting ➀Standard type ➁Reverse type (2)Types of eject button ➀Rigid button ➁Foldering button ➂Pop-up button (3)Position of eject buttons ➀Right ➁Left (4)Standoffs ➀None ➁2.2mm 2. Space saving Smaller size reduces occupied area on PC boards as compared to previous products. 3. Reduced Height: Connector height is minimized to 5.6mm, making possible thinner product designs. 4. Eject mechanism with high-level functionality Hirose Electric's original ejection mechanism provides an higher degree of card ejection over existing products. This improves the operational qualities of card removal. (Patents pending) 5. Wide Variety of Options Available • Standard type mounts to the top of the PC board and reverse type mounts on the underside of the board • Three types of eject buttons; rigid, flexible and POP-UP.All types can be installed on the right or left side of the ejector. • Available with standoff to utilize space under the connector for mounting other parts. 6. Light-weight Weight of 12.7g for normal button type helps achieve the reduced weight required in today’s products. A2 sProduct Specifications Current rating Ratings Voltage rating 0.5A 125V AC Operating temperature -55ç to +85ç(Note.1) Storage temperature -40ç to +70ç(Note.2) Operating humidity Relativehumidity 95% max. Storage humidity (With no dew-fall) 40% to 70%(Note.2) Item Specification 500V DC 500V AC 1mA Conditions 1.Insulation resistance 1000M ohms min. 2.Withstanding voltage No flashover or insulation breakdown. 3.Contact resistance 60m ohms max. (initial value) 4.Vibration No electrical discontinuity of 100ns or more Frequency: 10 to 2000 Hz, full amplitude of 1.52 mm or acceleration of 147 m/s2(peak), 4 hours in each of the 3 directions. 96 hours at temperature of 40ç and humidity of 90% to 95% (-55ç:30min./+5ç to 35ç:MAX 5min/85ç:30min/+5 -35ç:MAX 5min.) 5 cycles 10000 cycles at 400 to 600 cycles per hour Reflow: At the recommended temperature profile Manual soldering: 300ç for 3 seconds 5.Humidity (Steady state) Insulation resistance: 100M ohms min. 6.Temperature cycle Insulation resistance: 100M ohms min. 7.Durability Variations from initial contact resistance: 20m (Insertion/withdrawal) ohms max. 8.Resistance to Soldering heat No deformation of components affecting performance. Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during transportation. sMaterial SMT unit Parts Insulator Card connected section Contact Ground plate Eject metal fittings Phosphor bronze Stainless steel PPS Brass Material Finish Black Contact section: gold plating Lead section: solder plating Contact section: gold plating Lead section: solder plating ---------Remarks UL94V-0 ---------------------------- Guide unit Item Guide plate Push rod Rigid button type resin section resin section Foldering button type Eject Button POP-UP type spring spring pin resin section frame metal spring pin Nut Material Stainless steel Stainless steel PBT PBT Stainless steel Stainless steel PBT Stainless steel Steel Brass Steel Finish ------------------Color : Black Color : Black ------------------Color : Black ------------------Nickel plating ---------Remarks ------------------UL94V-0 UL94V-0 ------------------UL94V-0 ---------------------------M2X0.4 A3 sOrdering Information SMT Unit IC11S A - 68 PLR - 1.27SF - EJ R 1 1 2 Series name : IC11S Standoff type Blank : none A : 2.2mm Number of contacts : 68 Board Mounting Type: PL : standard type PLR : reverse type 7 Eject button positions R : right L : left 2 3 4 5 5 6 7 1.27SF : 1.27mm pitch SMT connector With ejector EJ : with ejector 6 3 4 Guide Unit IC11S A - BUR - FEJ R 8 9 10 11 11 12 Series name : IC11S Standoff type Blank: none A : 2.2mm Board Mounting Type BD : standard type BUR : reverse type 12 Eject button type EJ : rigid button FEJ : Foldering button PEJ : POP-UP button Eject button positions R : right L : left 8 9 10 (Note.) IC11S Series will be used in combination of SMT unit with guide unit. When using, please select the same type for the following items. Please note that other combinations cannot be used. • Series name • Standoff • Board-installed type • Eject button positions (1⇔8) (2⇔9) ( 4 ⇔ 10 ) ( 7 ⇔ 12 ) A4 sStandard Right rigid button type 34.4 MAX 3 59 42.545 P= 0.635 SMT unit ( 1 ) No.1 .


IC11S-BUR-PNEJL IC11S-BUR-PNEJR IC11SA-68PL-1.27SF-EJL


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)